Advertisement
dO nOt use the heater without the grille fitted.
8
dO nOt use the heater out of doors. these heaters are designed for indoor use only.
8
dO nOt cover heater when in use, and do not obstruct the air inlet and outlet grilles.
8
dO nOt place heater too close to yourself or any object, allow the air to circulate freely.
8
dO nOt touch the outlet grille of the heater during and immediately after use as it will be hot.
8
2. IntrOductIOn
industrial fan heater with Ptc heat conducting ceramic elements to achieve an instant, totally dry heat with no condensation, no gas, no
fumes and no smell. Ambient room thermostat maintains temperature at a pre-set level, ideal for industrial applications with two heat settings
or fan only. Supplied with power cable and 3-pin plug.
3. specIfIcatIOns
Model no:..................................peh2001
Power Settings:......................1000/2000W
supply:...............................................230V
dimensions (WxDxH):.....210x160x217mm
Weight:............................................1.75kg
4. heater OperatIOn
4.1.
Place the heater on a level floor in the area you require to heat. Allow a minimum of 2mtr between the heater and adjacent objects.
4.2.
Plug the heater into the mains supply and select the required output by using the rotary switch on the top of the heater. the setting are
4.3.
fan only, half heat, full heat. the thermostat is operated by the second nob.
4.4.
to switch the unit off, select "0". Allow the unit to cool before handling or storage.
warnInG! dO nOt touch the top of the heater when in use as it becomes hot.
‰
warnInG! Always allow elements to cool before moving the units. use only on a smooth even surface.
‰
5. MaIntenance
warning! Before attempting any maintenance ensure the unit is unpluged from the mains power supply, it is cool and on level
‰
ground.
dO nOt use the heater with out the grills fitted.
8
5.1.
Sealey recommend that repairs are carried out by a qualified electrician.
parts support is available for this product. to obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. contact your local solid waste authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMpOrtant: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
sole uK distributor, sealey Group.
Kempson Way, Suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7AR
Original Language Version
01284 757500
01284 703534
PEH2001 | Issue 1 31/05/16
www.sealey.co.uk
web
sales@sealey.co.uk
Advertisement
