Brother HL-1430 User Manual page 83

5
Open the rear cover. Pull the jammed paper out of the fuser unit.
If you have to pull the paper toward the back of the printer, the fuser may get dirty with toner powder
and it may scatter on the next printouts. Print a few copies of the test page until the scattering of
toner stops.
Caution
After you have just used the printer, some internal parts of the printer are extremely hot! Wait for the
printer to cool down before you touch the internal parts of the printer.
6
Close the rear cover.
6 - 8 TROUBLESHOOTING
Figure 6-7
Figure 6-8
HOT!