Related Manuals for TiEmme 2WAYS2
Summary of Contents for TiEmme 2WAYS2
- Page 1 Revision Date: 11/12/2017 2WAYS2 RADIO CONTROL FOR SYSTEM100 HYDRO STD2 TECHNICAL MANUAL Pag. 1 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2...
-
Page 2: Table Of Contents
CONTROL PANEL ...................... 4 ........................4 ....................... 4 ISPLAY THE MENU ........................ 5 ................... 6 HERMOSTAT ODIFICATION ......................... 6 3.2.1 Chrono Menu......................8 3.2.1.1. Chrono Modality ..................... 8 3.2.1.2. Chrono Programming ..................8 Pag. 2 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2... -
Page 3: Introduction
Check the presence of such instruments and make sure to turn them off in order to avoid electromagnetic waves pollution. If more remote controls are nearby, it is necessary to associate the remote control with a specific stove/boiler (see section 3, Settings Menu). Pag. 3 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2... -
Page 4: Control Panel
Er11: Real time clock error, day and time not correct due to prolonged absence of power supply Er12: Extinguishing for Ignition failed. Er15: Lack of voltage supply. Er17: Air Flow Regulator error. Pag. 4 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2... -
Page 5: The Menu
The storage of a new value is associated to the transmission to the control board; if it fails the message 'Transfer not successful ' appears. In this case try to modify again the parameter’s value. Pag. 5 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2... -
Page 6: Main Thermostat Modification
Menu to select the Chrono Program modality and to set the time of Ignition/Extinguishing of the boiler/stove. For more details please see section 3.2.1. Monitor This Menu shows some System data of interest Display Description Exhaust T. Exhaust temperature [°C] Pag. 6 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2... - Page 7 SET button on the terminal radio and verify the result of the operation Contrast Setting This Menu allows setting the display contrast Description Keys Display Set Contrast Modify the value Pag. 7 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2...
-
Page 8: Chrono Menu
Select the day of week and program the system ignition/extinguishing times; for each day there are 3 time slots. Programming Daily Daily Monday___________ Monday Daily________ Tuesday Weekly Wednesday Week-End 09:30 11:15 Thursday 00:00 00:00 Friday 00:00 00:00 Saturday Venerdì Pag. 8 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2... - Page 9 After choosing the favourite program: Select the programming time Enter in modify mode (the selected time blinks) Modify the timers Save program Enable a program ( appears) or disable it ( appears) Exit Pag. 9 / 9 DMAN63W0000020-2Ways2 Manual - System100 Hydro STD2...
Need help?
Do you have a question about the 2WAYS2 and is the answer not in the manual?
Questions and answers