Advertisement
Available languages
Available languages
Table of Contents
Thank you for purchasing our lighting
fixture.
Please clean with a soft, dry cloth ONLY!
Do not use cleansers.
www.hudsonvalleylighting.com
IMPORTANT:
Always unplug the power before installing or replacing bulb
Finial
and before cleaning or other maintenance.
Shade
INSTALLATION
1. Remove the table lamp and parts bag(s) from the carton. Before
Harp
discarding the carton, double check packing to make certain that all
Lamp
parts are found.
2. Insert the harp onto the saddle.
3. Install the lamp. The fixture is rated for 100 watt type A lamp.
Saddle
DO NOT EXCEED RECOMMENDED WATTAGE!
4. Carefully remove protective cover on the shade.
the harp, and secure with finial.
5.
Plug cord into wall outlet. Turn switch on socket.
Plug
L1041
Place shade on
Advertisement
Table of Contents
Related Manuals for hudson valley L1041
Summary of Contents for hudson valley L1041
- Page 1 L1041 IMPORTANT: Always unplug the power before installing or replacing bulb Finial and before cleaning or other maintenance. Shade INSTALLATION 1. Remove the table lamp and parts bag(s) from the carton. Before Harp discarding the carton, double check packing to make certain that all Lamp parts are found.
- Page 2 L1041 IMPORTANT: Toujours débrancher complètement le circuit électrique avant l’installation ou le remplacement d’une ou des Fleuron ampoule(s) ou avant de nettoyer, ou d’entreprendre tout Finial Abat-jour autre entretien. Harpe Shade INSTALLATION Ampoule 1. Retirer la lampe de chevet et le ou les sachet(s) avec accessoires Harp du carton.
Need help?
Do you have a question about the L1041 and is the answer not in the manual?
Questions and answers