Marineland MAXI-JET 400 Start Here

Start Here -
Model 400
6
1
2
4
5
3
1) Impeller 2) Front Cover 3) Flow Adjustment Plate 4) Strainer Adapter 5) Strainer 6) Hose Barb 7) Suction Cups
8) Inline Intake 9) Locknut 10) Impeller Housing with screws 11) O-Ring 12) Mounting Bracket
A
Option

Submerged Under-Water Use (

Model Models
400 900 & 1100
Each Sump Pump is preassembled for this Setup Option.
1.
the Flow Adjustment Plate
(Models 400, 900, 1100, 1800 & 3000 only)
System or Water Circulation. After pump placement continue on to Start Your Pump.
4.
(Options B and C) Installing Accessories - Follow These Steps First
1.
Models 1800 & 3000
Remove Screws
B
Option

Submerged Under-Water Use - With Strainer

Model 400
With the Flow Adjustment Plate removed, reinstall Front Cover. Install
1.
(Models 400, 900, and 1100)
. (Optional) Install Sponge
& Strainer
Install extra Hose Barb. 2.
C
Option

External Out-Of-Water Use

Models 900 & 1100
NOTE: Model 400 can
NOT be used for External use.
Inline Intake
Locknut
Remove Front Cover.
1. 2.
Rotate (optional) Impeller Housing and install with extra Hose Barb.

Start Your Pump

(All Models)
MAXI-JET Utility Pumps
®
Models 900 & 1100
6
7
1
2
8
9
3
- S E T U P O P T I O N S -
Models Models
1800 & 3000 4500 & 5500
(Optional) Adjust water flow using
2.
. Pick pump placement options Sump
3.
Remove front cover.
Pull
Apart
Models 900 & 1100
. Rotate
Strainer Adapter
(NOT Included)
Pick pump placement options Sump System or Water Circulation.
3. Continue on to Start Your Pump.
Models 1800 & 3000
Inline
Intake
Extra
Hose Barb
Locknut
Install Inline Intake and secure with Locknut.
(Models 900,1100,1800 and 3000)
1. ALWAYS Use suction
cups to stabilize the pump.
Questions or Missing Parts call Customer Service at (800) 322-1266.
Quick Setup Option Guide
Models 1800 & 3000
6
7
1
2
4
5
6
3
All Models)
Set
Water Flow
(Models 400, 900, 1100,
1800 & 3000 only)
Max
Min
2. Pop the Standard Flow Adjustment out with a screwdriver.
(Models 400, 900, 1100, 1800 and 3000 ONLY)
(Models 400/900/1100/4500/5500)
Models 4500 & 5500
Strainer Adapter
to adjust water flow.
(Models 4500 & 5500)
(Models 900/1100/1800/3000/4500/5500)
Models 4500 & 5500
Rotate Impeller
Housing
Extra
Hose Barb
(Models 1800 and 3000)
Place pump in Sump System as shown.
3.
2. Plug pump in.
NOTE: Drip Loop.
(for safety)
Models 4500 & 5500
6
1
7
10
2
8
9
Sump System Sump System
Setup
Setup
Circulation
There are two setup
NOTE:
options with accessory use:
Submerged Under-Water use,
Continue on to Setup Option B.
And/or External Out-Of-Water
use, Continue on to Setup Option C.
Sump System
Sump System
Setup Setup
Sump System Sump System
Setup Setup
Install extra Hose Barb.
(Models 4500 and 5500)
Continue on to Start Your Pump.
4.
NOTE: NEVER let
the pump run dry.
www.marineland.com
11
12
7
6
Water
Setup
Water
Circulation
Setup
06/08 AQ12227