Celia & Perah P4 User Manual

P4
/ User's Manual
From now on,
enjoy the time lled with
best music brought to you
by CELIA & PERAH !
Are you ready for wireless Hi-Fi?
Thank you for buying our product, we are aim to provide you great sound quality with convenient. This manual
will help you to enjoy best music in your every joyful day.
Hand craft and Bent Wood
Made of 8 layers of Michelia wood and 1 layer of Beech wood, formed by high temperature and intensive pressure, P4 is
a bentwood speaker offering elegant curves and strong presence. It's made for audiophiles who appreciate rich, solid
and warm sound out of natural wood while embracing the-state-of-the-art wireless technology. Each P4 is a unique
presentation of hand craftsmanship.
Squeeze Box Technology
P4's unique design creates maximum acoustic volume with very limited internal space. Thanks to CELIA & PERAH's
professional tuning technology, this compact speaker has much to offer than just solid bass and powerful sound.
Live Concert Technology
With CELIA & PERAH exclusive acoustic technology, unique configuration of 5 monomers of different function, and
high performance 3D sound processor, P4 has been designed to radiate sound in all directions, creating more natural
sound replication in all ranges. The effect is a "right there" feeling-- you can close your eyes and easily imagine yourself
in the studio or concert hall.
aptX®
aptX® has been the best kept secret of the professional audio industry for many years. Now music lovers can enjoy the
rich listening experience that only aptX® can deliver: pure wireless sound that doesn't compromise on audio quality.
This P4 is an aptX® enabled device. Now sit back, relax, and enjoy the surreal wireless sound.
Hand Craft Bent Wood + Creative Acoustic Design + Advance Wireless Technology = Your P4 !
In the Box
P4 speaker \ AC adaptor \ Power Cord \ Strap \ User's Manual
Control Panel
1. Power/Pairing : Long press - Toggle power on and off.
Short Press - From standby to pairing mode.
2. LED Blue : Flash - Standby.
Quick Flash - Pairing mode.
Steady on- Bluetooth connected.
LED Red : Steady on - Charging (Automatic turn off while full charged).
* It shows purple while blue and red LED light up simultaneously.
3. Vol +/- : Adjust volume level.
4. AUX : Aux-in with Ø3.5mm audio cable (not supplied).
5. 5V OUT : While your P4 with AC adaptor connected,
you are able to connect to your smart phone for charging.
6. DC IN : Charging you P4 by AC adaptor.
* Reset : Continuously press "Power/Pairing" and "VOL +" buttons simultaneously for 15 seconds to perform
system reset. Should not release within 15 seconds, it might cause abnormal sound, if it happens, do reset
again and ensure press for 15 seconds.
Operate your P4
1. Charging internal Li-ion battery
For very first time you use your P4 please full charge it
by connect AC adaptor to DC-in jack.
2. Power on
Press "Power/Pairing" to toggle on/off your P4.
3. Pairing mode
To enter pairing mode, you have to short press "Power/Pairing" button while device on.
* P4 will automatic into pairing mode if you first time use your device or paired Bluetooth device not found.
Make Bluetooth wireless connection
A: pairing and connect to your Bluetooth device
1. Turn on P4.
2. Set Bluetooth of your Bluetooth device to on.
3. Set P4 to pairing mode, the P4 will indicate blue LED flash, if it not in this status, short press
"Power/Pairing" button to enter pairing mode.
4. Perform the pairing procedure on the Bluetooth device to detect system.
5. Select "C&P Audio P4" on your Bluetooth device.
6. If passcode is require on your Bluetooth device, input "0000".
B: Connect to paired Bluetooth device
1. Turn on P4.
2. Set Bluetooth of your Bluetooth device to on.
3. Select "C&P Audio P4" on your Bluetooth device.
*For some Bluetooth Device, it will automatically connect.
*If the connect cannot be made, delete "C&P Audio P4" on you Bluetooth device and perform pairing again.
C: Connect by one touch NFC
1. Turn on P4.
2. Ensure NFC function enabled of your smartphone.
3. Touch your smartphone with P4 NFC logo.
(English)
6 5 4 3 2 1
Flashes quickly Bluetooth
Setting
Blurtooth
Pairing device
C&P Audio P4
Make connection with 3.5mm audio cable (not supplied)
1. Turn on your P4.
2. Connect to your audio device with 3.5mm audio cable.
*Bluetooth connection has the priority, if Bluetooth device connected and playing, system will stick on Bluetooth
connection. And you have to turn-off or disconnect your Bluetooth device. For some devices; system will switch
to Aux-in after few seconds of stop playing via Bluetooth.
Music
Sweet Functions
Charging your smart by P4 : While P4 has AC power supplied, you are able to charging your P4 via your
smart phone USB cable.
NFC (Near eld communication) : P4 build-in NFC tag supplied NFC Bluetooth one touch connection.
*We are not recommending you to modify your NFC tag of P4, only if you are the expert of it.
8hrs Battery operating : Build-in Li-ion battery support 8hrs continuously operation, the battery life will
depends on how loud and what kind of music you listen to.
Stylish Strap : Beautiful cotton strap. P4 is easy to carry around.
Install Strap
Counterclockwise the screw of side of P4, connect to your strap, and clockwise tie the screw, and you are able
to bring P4 everywhere easier.
Best Position
P4's acoustic design can against most of the environment; however, you can have better listen experience by
the instructions below.
1. Put P4 as high as your ears.
2. 30cm far from the back of P4 to wall.
3. At least 50cm far from side of P4 to wall.
Problem solving
Cannot make Bluetooth connection with P4.
* If passcode code is require on your Bluetooth device, input "0000".
* P4 will auto research and connect to last Bluetooth device, if the blue LED indicate not flashed, short press
"Power/Pairing" button to enter pairing mode.
*If there has another device has connected to p4, you are not able to interrupt.
*Remove "C&P Audio P4"from your Bluetooth device and perform pairing procedure again.
*Reboot your P4 and your Bluetooth device.
*Reset your P4 b y instruction of control of this manual.
Not loud enough or too loud.
*The volume of Bluetooth and Aux-in were separated, you are able to volume up or down by "Vol +" and "Vol –"
bottons for different mode.
Can I modify NFC tag of P4?
* We are not recommending you to do so, we are not warranty the modified tags.
Specifications
Acoustic Technology Drivers Units
C&P Audio | Squeeze Box Full Range- 4"15W X2
C&P Audio | Live Concert Passive Radiator- 4" X1
CSR | aptX® Tweeter- 2"20W X2
Acoustic Performance Bluetooth®
4.0
Dynamic Range : 40~20000 Hz
Max. Output : 99.72 dB@ 1m Communication Distance : 10m
(@open area)
Important Safety Instructions
CAUTION: NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warning.
4. Follow all instructions.
5. Do not use this speaker near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other speaker( including
amplifier) that produce heat.
9. Do not expose this speaker to extremely high or low
temperatures.
10. Do not place this speaker in direct sunlight or place it in
high temperature car for long periods. This may cause
malfunction.
11. Do not attempt to replace or remove this speaker's
battery. You may damage the device.
12. Please use the original supplied charger, other chargers
may look similar, but may cause electric shock, or the
different voltage output could damage the product.
13. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
● Website : www.celia-perah.com ● Email : service@celia-perah.com
AUX
a
b b
1.5m
a=30cm, b≧50cm
AC Power Source : 100~240V AC
DC : 19V 2A
Amplifier : 25 Watt
5V Charging : 5V 2 A
Dimensions : 440 x 141 x 96 mm
Weight : 2.6 Kg
14. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the speaker.
15. Only use attachments / accessories specified by the
manufacturer.
16. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the speaker.
When a cart is used, use caution when moving the cart/
speaker combination to avoid injury from tip-over.
17. Unplug this speaker during lighting storms or when
unused for long periods of time.
18. Connect only to the proper mains voltage.
19. To completely disconnect this speaker from the AC Mains,
disconnect the power supply cord plug from the AC
receptacle.
20. Do not expose this speaker to dripping or splashing and
ensure that no objects filled with liquids, such as vases,
are placed on the speaker.
21. When lifting the speaker ensure the base is supported, or
using the strap.
22. Ensure the surface for placement is secure and will
support the weight of the product.
23. Refer all servicing to qualified service personnel. Servicing
is required when the speaker has been damaged in any
way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
speaker, the speaker has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
24. Loudspeaker drive units produce stray magnetic fields.
Do not place any article that may be damaged by such a
magnetic field (audio and video tapes, credit and other
swipe cards and the like) within 0.5m (2 feet) of the
apparatus.
b≧50cm