Table of Contents
Advertisement
3.0
OMNI2 Operating Principles
3.1 OMNI2 Driving Characteristics
The OMNI2 has been programmed to suit the SID, the
powerchair's drive performance has been programmed to suit
your needs. The powerchair's speeds, acceleration rates and
braking rates can be adjusted to meet exact requirements.
Refer to your health care professional or servicing agent.
Before test driving the system ensure there is sufficient space
in which to drive the wheelchair, and that you understand how
to stop the wheelchair quickly.
Firstly, refer to the operating instructions for the type of SID in
use. Ensure that you fully understand each SID command.
It is advisable to initially select the lowest speed setting and
allow yourself to become familiar with the controls before
increasing the setting.
The OMNI2 also contains a training function, whereby any of
the SID's directional commands can be disabled. For example,
the left and right commands could be disabled, in order to
allow you to become familiar with driving forwards. Refer to
your health care professional or servicing agent to ensure
these values are comfortable and safe.
WARNING:
Sunrise Medical accepts no liability for any losses resulting
from unsuitable values.
OMNI2
Rev.A
3.2 General Operating Principles
When the OMNI2 is powered-up or awoken, then a screen
such as in Fig. 3.0 will appear.
Power-Up can be via the On/Off button on the Display Section
or via a switch connected into the External On/Off Switch Jack;
while Wake-Up can be via the User Switch.
Indoor Slow
This is a typical screen. Depending on SID type, programming
or system configuration and status, there may be additional
icons.
The wheelchair can now be driven with the SID. While driving,
the speed of the wheelchair will be indicated by the numeric
display and the graphical display.
Fig. 3.0
Battery
Indicator
Time
Speed Display
Digital Speed Display
Odometer
Maximum Speed
Indicator
Current Profile
Profile Name
11
Advertisement
Table of Contents
