Advertisement
WALL MOUNTING ASSEMBLY
• For added safety and stability, install the wall mounting hardware.
• Always use wall anchors appropriate to your wall type, like plaster, drywall, concrete, etc.
• When possible, mount to wood studs.
• Consult a qualified professional for mounting.
HARDWARE
A. Screw
E. Wood Screw
B. Small Washer x 2
F. Nut
C. Plastic Strip
G. Large Washer
D. Plastic Anchor
H. Wrench
Attach the plastic strip to the back of the
1
product. There is a pre-drilled hole on the
house's backboard (O).
F
B
B
C
• DO NOT install on a wall where items can fall off and injure a child.
• CHOKING HAZARD: Unassembled parts may be a choking hazard to children 3 years and younger.
• Adult assembly required. Hardware contains small screws with sharp points. Keep unassembled parts out of reach of small children.
• Serious or fatal injuries can occur from furniture tipping over. To prevent the product from tipping:
• Use mounting hardware to secure the house to a wall. This will reduce, but NOT eliminate, the risk of tipping over.
• DO NOT allow children to climb on the house.
• Keep remote controls, toys, and other items that might attract children away from this product.
• DO NOT place heavy items, like televisions, on top of this product.
NOT INCLUDED
• Use a 1/4" (6.5 mm) drill bit to drill a pilot hole in
2
the wall.
• DO NOT drill an oversized hole, or the anchor will
not hold tightly to the wall.
• Tap the wall anchor into the hole.
• Secure the house to the wall with a screw (E)
through the plastic strip and into the wall anchor.
D
A
1/4"(6.5mm)
14
26
37
43
G
49
E
55
61
CONTENTS
27
28
29
32
33
34
38
39
40
44
45
46
50
51
52
56
57
58
62
3
31
x 32
30
x 2
35
36
+
+
41
42
47
48
53
54
59
60
Advertisement
