Pioneer PDK-1014 Operating Instructions Manual page 13

Table top stand

Available languages

2. Insert the stand into the plasma display

Check that the stand and plasma display are facing the proper direction, then insert the plasma display into the stand.

This procedure should be done by at least three persons, since the plasma display is heavy and has a high center of gravity.

Hold the bottom and the grips on the back of the plasma display and support the top when inserting the plasma display into the

stand.

Plasma Display

Installing the Plasma Display on the Stand

Hold both sides of the plasma display

and lift it up, then place the plasma

display onto the stand so that the holes

located at the bottom of the display

engage with the stand.

E-5

Table of Contents