USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE ABOUT THIS DOCUMENT This manual has been compiled by Jefferson Tools and is an integrated part of the product with which it's enclosed and should be kept with it for future reference.
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE UNPACKING & ASSEMBLY Upon receipt of the compressor, ensure all components are present and have remained undamaged in transit..Retain the packing materials and packaging in case future transportation of the compressor is necessary. We recommend that the packaging is kept, at least within the period of the guarantee (Fig.1).
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE BEFORE FIRST USE Check the oil Level: Before using the compressor check the oil level using the dipstick. If the oil is not up to the mark it should be topped up with Jefferson HT68 Compressor Oil (see Fig.6).
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE SAFETY GUIDELINES Read and ensure that you understand all of the operating instructions, safety precautions and warnings in this Instruction Manual before operating or maintaining this compressor. Most accidents that result from compressor operation and maintenance are caused by the failure to observe basic safety rules or precautions.
Page 9
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE EQUIPMENT SAFETY • Never place your hands, fingers or other body parts near the compressor’s moving parts during operation. Ensure that the equipment is isolated from the power supply and all switches in the OFF position before carrying out maintenance, repairs or adjustments.
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE WARNING LABELS Label Potential Hazard Prevention Water directed at electrical connections or switches, or Never attempt to clean the air compressor while it is objects connected to an electrical circuit, could result in running.
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE SAFETY VALVE IMPORTANT: The safety valves supplied with this equipment are designed and constructed for use exclusively with compressed air, free from impurity. The materials used in construction are suitable for operating the valve at the rated pressure and temperatures. The viton or NBR gasket conserves the resistance characteristics, even in prolonged use.
Page 12
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE OVERLOAD CUT OUT The compressor is equipped with an overload cut out (E) which operates as a safety device to protect the motor. Should a fault occur and begin to overheat the motor the overload cut out will automatically operate, cutting power.
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE MAINTENANCE Before attempting any maintenance jobs on the compressor, make sure of the following: 1. The master power switch is tuned off and equipment is isolated from the mains supply.
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE TROUBLESHOOTING FAULT CAUSE REMEDY Tank pressure drops continually. Air leak, check all connections. Locate and rectify leak. Run the compressor at maximum pressure then switch off and disconnect. Brush a soapy water solution over the connections and look for bubbles.
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE ENVIRONMENTAL PROTECTION Recycle any packaging and unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE PARTS LIST - MAIN ASSEMBLY Quantity Description Quantity Description Air Tank Belt Guard Hex. Nut 30.1 Belt Guard Caster Wheel 30.2 Belt Guard Axle V-Belt Wheel Hex.
Bratislava Country : Slovakia #1354 Equipment Category: Air Compressor (Item 8) Product Name/Model: 150L Air Compressor JEFC150L10B-230 - 150L Air Compressor • 230V • 3HP • 10Bar • Belt Drive Measured Sound Power Level: 96dB Guaranteed Sound Power Level: 96dB...
3 months after the initial sale to the distributor. 2 Years • JEFC150L10B-230 • 150L 3HP 10Bar Belt Driven Air Compressor 90 Days • All replacement parts purchased outside of the warranty period Important: All parts used in the repair or replacement of warranty covered equipment will be subject to a minimum of 90 days cover or the remaining duration of the warranty period from the original date of purchase.
Page 22
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE Claiming Warranty Coverage The end user must contact Jefferson Professional Tools & Equipment (Tel: +44 (0) 1244 646 048) or their nearest authorised Jefferson dealer where final determination of the warranty coverage can be ascertained.
Page 23
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE www.jeffersontools.com...
USER MANUAL JEFC150L10B-230 150L AIR COMPRESSOR • 230V~50Hz • 3HP • 10Bar • BELT DRIVE IMPORTANT! SAFETY FIRST! Before attempting to use this product please read all the safety precautions and operating instructions outlined in this manual to reduce the risk of fire, electric shock or personal injury.