Page 1
Assembly Instructions Product size: 213x127x190cm (7x4.2 FT) IMPORTANT TO FOLLOW THESE ASSEMBLY INSTRUCTIONS Important, please retain for future reference. Read carefully. Requires two people and takes 3-4 hours for Installation. www.royalcraft.co.uk 1 / 33...
Page 2
Your storage building must be anchored to prevent wind damage. Once secured, it is highly recommended applying silicone along the inside of the base rail to minimize condensation. CAMBRIDGE 1 2 / 33...
Page 3
Clean the snow with necessary tools to make sure it is safe to enter into. The shed is not made for living but storing stuff. Please add some oil on the top and bottom door sliding channel to make door slides smoothly. CAMBRIDGE 1 3 / 33...
Page 29
3. DO NOT STEP ON CHANNELS until flooring material is in place! 4. Be sure all the parts fit together properly before proceeding. CAMBRIDGE 1 29 / 33...
Page 32
B) 25-35mm long self drilling 16 pcs screws to secure Plywood Flooring. 1. Make sure the foundation kit frames are square and level . 2. Cut Plywood to recommended dimensions. CAMBRIDGE 1 CAMBRIDGE 1 32 / 33 32 / 33...
Page 33
3. Fasten Plywood to foundation kit frames with self drilling screws . √ √ ╳ ╳ 33 / 33...