Bresser BR-RL10B Instruction Manual

INSTRUCTION MANUAL
GB
GENERAL WARNINGS
DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of reach
of children and animals.
RISK OF MATERIAL DAMAGE!
Make sure that no one can trip over connection cables of the device.
The device could be knocked over.
When inserting the smartphone into the holder, ensure that the
smartphone is fixed securely in order to prevent it from falling down
and causing damage!
The manufacturer accepts no liability for damage to property caused
by improper or insufficiently safe installation!
Only use the recommended power supply* for the power adapter!
The manufacturer accepts no liability for voltage damage caused by
the use of an unsuitable power adapter!
DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power
source (power adapter). Only use the device as described in the
manual. Otherwise, you run the DANGER of an ELECTRIC SHOCK.
Never bend, squeeze or pull power cables, connecting cables,
extensions or connectors. Protect cables from sharp edges and heat.
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with damaged
electrical parts! Damaged parts must be replaced immediately by an
authorized service agent.
Operate the device only in a completely dry environment and do not
touch the device with wet or damp body parts.
RISK OF GLARE!
Make sure that people and animals do not look into the light. The
high luminosity can cause glare to the eyes and afterimages. This
impairment of vision can lead to accidents.
Fig. 1
 
 
 
 
 
*not included
 
Fig. 1a
 
 
A
 
 
 
B
D
 
BR-RL10B
LED Ring light
with stand and base
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and
ensure that it is stored in a reasonably safe place.
• Keep children and animals away from the device! They could knock
the device over.
• Make sure that no one can trip over connection cables. The device
could be knocked over.
• Do not expose the device to high temperatures. Do not short-circuit
the device or dispose of in fire! Excessive heat and improper handling
can cause short circuits, fires and even explosions!
• Only use the recommended power supply*!
IMPORTANT NOTE!
Do not disassemble the device! In the event of a defect, please contact
your dealer. They will contact the Service Center and can arrange the
return of this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the
appliance is not in use, in case of a longer interruption of operation
and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power
supply at any time. The power outlet should always be near your
appliance and should be easily accessible, as the plug of the power
cord serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains plug
and never pull the cable!
Do not subject the device to excessive vibrations.
PARTS OVERVIEW
 Ring light w. fork arm  Flexible arm  –Button  Upper fixing ring
 Stand  Lower fixing ring  Base plate  Power cord  USB-A plug
 On/Off/Colour set button  + Button  Smartphone* holder
SCOPE OF DELIVERY
Ring light w. fork arm (1x)(A), flexible arm w. smartphone holder (1x) (B),
stand (1x)(C), base plate (1x)(D), instruction manual
ADDITIONALLY REQUIRED
5V USB power adapter*
C
GENERAL ASSEMBLY INSTRUCTIONS
• Before assembly, remove all accessories from the package and lay
them out on a level surface.
• Carefully screw the parts together during assembly to ensure the
necessary stability!
• When inserting the smartphone into the holder, ensure that the
smartphone is held securely!
Art. No. F004512 - F004513
(Fig. 1)
(Fig. 1a)