Download Print this page

Mifa X1 Manual

Wireless earbuds

MIFA X1 Wireless Earbuds Manual

01 Warning

To ensure proper use and trouble-free operations, please carefully read this user

manual first.

 Please charge the product before the first use.

 Please use and store the product at room temperature.

 Do not throw and drop the product to avoid damages.

 Do no dissemble the product or make any modifications to the structure or any

parts of it.

 Please charge the product with a rated voltage charger.

 Keep the product out of children's reach.

Before the first use, please take the earbuds out from the charging case and take off

the protection film on each earbud. Then put them back in the case and charge it

with the included USB cable.

Table of Contents

Do you have a question about the X1 and is the answer not in the manual?

Page 1 MIFA X1 Wireless Earbuds Manual 01 Warning To ensure proper use and trouble-free operations, please carefully read this user manual first.  Please charge the product before the first use.  Please use and store the product at room temperature.
Page 2 Open the case Close the case Battery indicators of the charging box 0%-25%: flashes once a second 26%-50%: flashes twice a second 51%-75%: flashes 3 times a second 76%-100%: flashes 4 times a second The led indicator will keep on once fully charged. 04 Power On/Off Power on Open the charging box and take out the earbuds.
Page 3 After the earbuds connect with each other successfully, activate the Bluetooth of your device and search for X1. Select it on the list. The earbuds will beep once the pairing is successful. If a pin code is required, please input 0000.
Page 4 Bluetooth devices. 5. Please make sure the earbuds are in pairing mode (the indicator of the master earbud flickers) if your new smart device does not find X1. 06 Touch Control After connecting with your smart device, you can operate the earbuds as below.
Page 5 Volume+: Touch the sensor area twice of the left earbud to turn up the volume. Siri voice mode: Touch the sensor area of any earbud 3 times to activate Siri voice mode. Turn off the indicator while playing: Touch and hold the sensor area of each earbud for 5 seconds to turn off the indicator light.