Advertisement
Quick Links
Advertisement
Summary of Contents for MMP 200900
- Page 1 Model 200900 Alarm System Operations Manual Printed In the USA 2005...
-
Page 2: Troubleshooting Guide
Table of Content Section 6 Section 1 o Features MMP MODEL 200900 ALARM SYSTEM Alarm volume TROUBLE SHOOTING GUIDE Alarm settings Mechanical door switch External alarm connection 1) KEYED SWITCH IS IN THE ( ON ) POSITION Low battery chirp... - Page 3 Section 5 Section 1 Battery Features o Standby o Alarm volume The battery life of the alarm is determined by the state of The alarm has a very high decibel level (85-120 db). the alarm. When the alarm is in standby, the buzzer and The decibel level will vary with the life of the strobe off, the alarm will function in standby for two full battery.
- Page 4 Section 2 Standard Features 3. Alarm activates for 30sec after door is opened. To obtain this setting “Dip” switches 1, 2 and 3 will need to be in the down position while switch 4 is up, o Key Switch see Figure 4-3. The Key Switch is attached to the right side of the unit as indicated in Figure 2-1.
- Page 5 Section 4 Section 2 1. Alarm is activated when door is opened, shuts off o Mechanical door switch when door is closed. The mechanical door switch is used to activate To obtain setting #1 “Dip” switch 1 will need to be the alarm when the door is opened, deactivate down and the rest up, see in Figure 4-1 the unit when the door is closed.
- Page 6 Section 2 Section 3 Optional accessories o External alarm relay wiring The relay wiring is used for connecting the alarm to an o Strobe external security system. Wires are connected by inserting The strobe is used as a visual indication of the alarm them into the upper slots of the connector as seen in figure being activated.
Need help?
Do you have a question about the 200900 and is the answer not in the manual?
Questions and answers