Distance; Level Calibration - Onkyo TX-RZ50 Instruction Manual

Hide thumbs Also See for TX-RZ50:
Table of Contents

Advertisement

2. Speaker
„ 3. Distance
Set the distance from each speaker to the listening position.
‰ Front Left
(Default Value: 12.0 ft/3.60 m)
Center
(Default Value: 12.0 ft/3.60 m)
Front Right
(Default Value: 12.0 ft/3.60 m)
Height 1 Left
(Default Value: 9.0 ft/2.70 m)
Height 1 Right
(Default Value: 9.0 ft/2.70 m)
Height 2 Left
(Default Value: 9.0 ft/2.70 m)
Height 2 Right
(Default Value: 9.0 ft/2.70 m)
Surround Right (Default Value: 7.0 ft/2.10 m)
Surr Back Right (Default Value: 7.0 ft/2.10 m)
Surr Back Left
(Default Value: 7.0 ft/2.10 m)
Surround Left
(Default Value: 7.0 ft/2.10 m)
Subwoofer
(Default Value: 12.0 ft/3.60 m)
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the
remote controller. When using the unit "feet", the setting is available in
increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the
setting is available in increments of 0.03 m from 0.03 m to 9.00 m.
• When measurements are made using Dirac Live (
displayed as "msec" and the value cannot be changed.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
Surr Back Left):
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
„ 4. Level Calibration
Adjust the volume level of each speaker.
‰ Front Left
Select a value between "-12.0 dB" and "+12.0 dB" ("-15.0 dB" and "+12.0 dB"
for Subwoofer) (in 0.5 dB increments). A test tone will be output each time you
change the value. Select the desired level.
(Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right,
→p161,
p165), units are
Surr Back Left):
• Depending on the use of the ZONE speakers, it may not be possible to select
(Default Value: 0.0 dB)
Center
(Default Value: 0.0 dB)
Front Right
(Default Value: 0.0 dB)
Height 1 Left
(Default Value: 0.0 dB)
Height 1 Right
(Default Value: 0.0 dB)
Height 2 Left
(Default Value: 0.0 dB)
Height 2 Right
(Default Value: 0.0 dB)
Surround Right (Default Value: 0.0 dB)
Surr Back Right (Default Value: 0.0 dB)
Surr Back Left
(Default Value: 0.0 dB)
Surround Left
(Default Value: 0.0 dB)
Subwoofer
(Default Value: 0.0 dB)
this setting.
Setup
Setup
134

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents