Dell SE2219H User Manual page 12

Electrical specifications
Description
Video input signals
Synchronization
input signals
AC input voltage/
frequency/current
Inrush current
Power Consumption 0.2 W (Off Mode)
As defined in EU 2019/2021 and EU 2019/2013.
1
Max brightness and contrast setting.
2
P : Power consumption of On Mode measured with reference to Energy Star test method.
3
on
TEC: Total energy consumption in kWh measured with reference to Energy Star test method.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
peripherals you ordered, and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy
or completeness is expressed or implied.
│
12 About your monitor
Values
• Analog RGB: 0.7 V ± 5 %, 75 Ω input impedance
• HDMI 1.4 (HDCP 1.4), 600 mV for each differential line,
100 Ω input impedance per differential pair
Separate horizontal and vertical synchronizations,
polarity-free TTL level, SOG (Composite SYNC on green)
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.5 A
30 A (120 V AC Input)
60 A (240 V AC Input)
1
0.3 W (Standby Mode)
12.9 W (On Mode)
1
20 W (Max)
2
15.95 W (P )
3
on
50.59 kWh (TEC)
3
1