Page 2
BB24V1U UPS is designed to provide a local power solution for cable telephony, wireless local loop (WLL) and fiber to the home (FTTH) broadband equipment. IMPORTANT SAFETY WARNINGS This manual has important instructions on installing and operating this device. Before you attempt to unpack, install or operate this device, thoroughly read this manual.
Battery cover Installation Desktop: Using a screwdriver, remove the screw on the bottom of BB24V1U. Slide off the battery cover and connect the battery wires. Replace the battery cover and tighten the screw. Plug the AC power cable into an electrical outlet.
Battery Replacement (Technician Reference Only) As long as utility power is on, you can leave BB24V1U and other connected equipment powered on while replacing a battery. STEP 2: STEP 3: STEP 5: STEP 1: STEP 4: Slide off the Remove the battery...
Communication Signals The UART communication signals of BB24V1U are isolated from its internal circuitry via photo-coupler to transmit and receive signals. “SIG RTN” (Signal Return) is a common return point for all communication signals. In a typical application, the equipment digital ground should be connected to Signal Return.
Limited Warranty Charter warrants to you, the Initial Purchaser, that the Product will be free from defects in material and workmanship for one year from the date of original purchase, subject to the terms of this Limited Warranty. This Limited Warranty gives you specific rights, and you may have other rights, which vary from State to State or Province to Province.