PEERLESS PAN42 Assembly Instructions

Assembly Instructions - Adapter Bracket for Panasonic
42" Plasma Screens
Two Instruction sheets are included with this product. Begin with this sheet.
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Parts List
PARTS LIST
PART # QTY.
AA 200-0213
BB 590-1115
CC 590-1121
DD 520-1152
EE 540-9406
FF 540-1002
Note: Some parts may appear slightly different than illustrated.
*Place four .52 ID x .8 OD x .5 H spacers (CC) inside recesses in back of plasma. Attach adapter plate (AA) to back of
plasma using four M8 x 40 mm socket pin screws (DD), four 5/16 washers (EE), and four screw insulators (BB) as shown in
figure 1 and detail 1. *Note: For a Panasonic
recesses in back of plasma. Attach adapter plate (AA) to back of plasma using four M8 x 40 mm socket pin screws (DD) and
four 5/16 washers (EE) as shown in figure 1.1 and detail 2.
Tighten M8 screws (DD) using 4 mm allen wrench (provided with mount).
• Do not overtighten. Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
fig. 1
AA
CC
BB
EE
Plasma
(cut out)
DETAIL 1
Visit the Peerless Web Site at www.peerlessindustries.com
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
DESCRIPTION
1 adapter bracket
4 1/2" OD screw insulator
4 .52 ID x .8 OD x .5 H spacer
4 M8 x 40 mm socket pin screw
4 5/16 washer
4 .34 ID x .75 OD x .25 H washer
®
CC
BB
AA
EE
DD
DD
BB
TH42PA2OUP plasma, place four .34 ID x .075 OD x .25 H spacers (FF) inside
WARNING
fig. 1.1
FF
Plasma
(cut out)
DETAIL 2
1 of 2
For customer service call 1-800-729-0307 or 708-865-8870.
®
AA
CC
EE
AA
AA
DD
EE
ISSUED: 01-22-02 SHEET #: 200-9301-7 11-16-04
Model: PAN42
FF
DD
FF
EE
DD