Structure Of The Detent End And The Correct Order Of Parts. Fig. 6.8; Discharge Conveyor - Palax KS45S User Manual

6.7. Structure of the detent end and the correct order of parts. Fig. 6.8

Keep the cover E of the detent end depressed while undoing the valve screws F, as the stiff

springs can throw the cover off. This can also make the springs and balls of the detent fly off.
To ensure that the small balls C stay properly in position during assembly of the detent end B,

apply a small amount of Vaseline to the holes in the side of the detent end B. Ensure that part
A comes into the correct position, as illustrated in the picture.

6.8. Discharge conveyor

The conveyor is equipped with hydraulic

transmission
The conveyor chains are equipped with

automatic spring tensioning.
The bearings at the top of the conveyor

are lubed-for-life so they do not require
any maintenance.
The bearing at the lower end of the

conveyor shall be lubricated every 100
hours.
Palax KS45s
32
Translation 1-2017