Table of Contents
Advertisement
WARNING:
Never connect the appliance to electronic energy saver plugs.
This appliance can be used with mains and sine-controlled inverters. Main controlled inverters are used
for photovoltaic systems which are connected directly to the national grid.
Sine-controlled inverters must be used for isolated applications (e.g. on ships or in mountain lodges)
which are not connected directly to the national grid.
The appliance requires a 3-pole socket. The socket should be connected by a qualified electrician only.
Where there is a 2-pole standard wall socket, it is the responsibility of the customer to have this socket
replaced with a correctly grounded 3-pole wall socket. Do not use any adapter plugs.
Be sure that the location of your Glass Door Refrigerator has a near and accessible electric socket.
It is recommended that a separate circuit serving only your wine cellar be provided. Use an outlet that
cannot be turned off by a switch. Do not use an extension cord.
2-pole standard wall socket must be replaced with a 3-pole grounded socket. Do not use adapters.
Door opening.
The door of your Glass Door Refrigerator is configured by default to have an aperture up to 115°. This
makes for easy access to shelves for loading or cleaning. However, if the appliance is installed under
counter, it is recommended to install the Door Stopper Pins in the hinge to avoid hitting the wall, cabinets
or another appliance installed next to the Glass Door Refrigerator.
To install the Door Stopper Pin follow the next instructions:
1. Open the door at <90° and position yourself near the bottom hinge of your appliance.
Page | 11
Advertisement
Table of Contents
