Page 1
Maintaining the Feeder Service The JUDGE™ feeder at least once a year. Inspect the motor, timer, solar panel, check PRODUCT GUIDE the battery and all electrical connections. Re-tighten bolts to be certain they are snug, and periodically clean the hopper to preclude caking and clogging due to feed dust.
Page 2
DO NOT fi ll the feeder until step 4. Assemble your JUDGE™ feeder as described above. For best results, stake it down on level ground and position so your solar panel faces the sun (S/SW in most U.S. states). Loosen and remove orange knobs to adjust solar panel so it faces the sky, then re-tighten to lock the angle.