Page 1
Instruction & Recipe Booklet Pressure Cooker Plus - CPC-610XA For your safety and continued enjoyment of this product, always read the instruction booklet carefully before using.
Children should be supervised to injury. ensure that they do not play with the • The use of attachments not appliance. recommended by Cuisinart may be Do not touch hot surfaces of the • hazardous. Pressure Cooker Plus. Use handles •...
BEFORE THE FIRST USE These foods should not be cooked in this appliance unless following a Before using your Pressure Cooker Plus Cuisinart Pressure Cooker Plus ® for the first time, remove any dust from recipe. shipping by wiping clean with a damp •...
PARTS AND FEATURES A. Pressure Limit Valve B. Lid Handle C. Red Float Valve (Pressure Indicator) D. Lid E. Push Rod F. Sealing Ring G. Sealing Ring Supporting Cover H. Rubber Grommet I. Cooking Pot J. Condensation Collector K. Upper Ring L.
GETTING TO KNOW YOUR CONTROL PANEL 1. Low Pressure 2. High Pressure 3. Browning – This preset temperature allows cooking over high heat, without the lid, before pressure cooking. Browning foods in a small amount of fat in this way seals the outer surfaces of meats and vegetables, producing a visually appealing, flavourful exterior with a moist, tender interior.
UNPACKING clog the pressure limit valve, which can cause excess pressure to INSTRUCTIONS develop. Always use at least ½ cup liquid when pressure cooking. Remove any packaging materials and promotional labels from your Pressure Cooker Plus. Be sure all parts have been included before discarding any packaging materials.
OPERATING NOTE: The Keep Warm setting should not be used for more than 12 hours. The INSTRUCTIONS quality or texture of the food will begin to change after 1 hour on Keep Warm. In the With the unit on and the LED displayed, Keep Warm setting, a little condensation press the MENU button to select the in the upper ring is normal.
3. Steam will immediately begin to circulate. release through the valve. Keep face Close and secure lid and leave the and hands away from steam as it is pressure valve in the open position. released, and do not release pressure Press start.
CLEANING AND MAINTENANCE 1. Unplug the power cord and allow it to cool before cleaning. 2. Clean the outer body with a soft cloth such as a paper towel or microfiber cloth. Do not immerse the outer body in water or pour water into it. 3.
TROUBLESHOOTING Symptom Possible Reasons Solutions The sealing ring assembly is not Re-install the sealing properly installed in lid. ring assembly as instructed in INSTRUCTIONS FOR Lid does not lock. USE, page 6. The float is seized by the push rod. Push the rod with hands.
Need help?
Do you have a question about the CPC-610XA and is the answer not in the manual?
Questions and answers