Do you have a question about the mr.steam Audio@Home and is the answer not in the manual?
Questions and answers
Summary of Contents for Sussman mr.steam Audio@Home
Page 1
Installation, Operation and Maintenance Manual Installation, Operation, and Maintenance Manual Audio@Home ® Audio@Steam ® 240 Volt steam ® Feel Good Inc. ®...
Page 2
NOTE: All information in this technical manual is based on the latest product information available at the time of publication. Sussman-Automatic Corporation reserves the right to make changes at any time without notice.
Page 3
IMPORTANT SAFETY INFORMATION Before installing or connecting the Audio@Home, please read the following: • To prevent a shock hazard, do not disassemble or alter the Audio@Home. • To prevent over temperature shutoff and equipment damage, do not use foam to insulate the Audio@Home.
mr . steam ® ® Audio@Home 1. General Information Box Contents Audio@Home General Installation Figure 2 shows how to use the Audio@Home standalone system within your steam room (i.e., if your steam room does not use iSteam3). Audio@Home Speaker wire (100 ft max) Speakers Audio@Home Grounded wall outlet...
steam ® ® ® Audio@Home 2. Installing Audio@Home Audio@Home Dimensions Figure 3 shows the face-on dimensions of Audio@Home. Figure 4 shows the side-view dimensions of Audio@Home. Shock hazard. Do not place the control box in a location where it can get wet. Locating and Installing Audio@Home To prevent water from getting inside the device, Audio@Home should be mounted on two stable vertical surfaces (e.g., studs) as shown in Figure 5.
steam ® ® ® Audio@Home 3. Connecting Audio@Home (Audio@Home does not connect to the steam Generator) • To reduce the risk of electric shock, do not remove the screws on the back of Audio@Home. No user serviceable parts inside. Refer servicing to qualified service personnel. •...
steam ® ® ® Audio@Home Connecting Speakers 1. Connect individual speaker wires — or a 10-pin MATE-N-LOK adapter with attached wires — to the speaker outputs. Refer to Figure 10 and Figure 11 for connector identification. IMPORTANT NOTES • If you use individual speaker wires, the recommended socket crimping contact is an AWG 14-20 (TE Connectivity part number 350550-3).
steam ® ® ® Audio@Home Pairing a Bluetooth-Enabled Device To pair a Bluetooth-enabled device to Audio@Home: 1. Ensure that the mobile device is in range of Audio@Home, and that it is powered on and Bluetooth is turned on. 2. Open the Bluetooth settings on your device. 3.
steam ® ® ® Audio@Home 5. Regulatory Statements FCC Compliance Statement Contains Transmitter Module FCC ID: A8TBM23SPKXYC2A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
mr . steam ® Audio@Home ® 6. About Audio@Home Audio@Home offers you the perfect means to bring music into your steam room. Audio@Home is compatible with bluetooth devices. Audio@Home can connect to two speakers. IMPORTANT NOTES • If a Bluetooth-connected device moves out of range and loses connection with Audio@Home, it should reconnect auto-matically with Audio@Home (without having to go through the pairing process again) when moved within range.
Need help?
Do you have a question about the mr.steam Audio@Home and is the answer not in the manual?
Questions and answers