Kasanova KIV000020NOC Instruction Manual page 23

3-IN-1 MULTIFUNCTIONAL FLOOR CLEANER
company reserves the right to update the product.
PRODUCT DISASSEMBLY AND INSTALLATION
INSTRUCTION FOR HANDLE INSTALLATION
• Penetrate the end of the handle along with the wire vertically to the mouth of the main body
until the arrow on the back is totally sunk into it. After clicking, make sure the handle is tight and
no flexible, then install successfully. (pic 1)
• If disassembly, remove the screw at the back with a tool, then press the spring sheet with
something hard into the screw hole and pull out the handle. (pic 2)
INSTRUCTION FOR CLEAN WATER TANK INSTALLATION AND DISASSEMBLY
• To take out the clean water tank, hold the unit with one hand and press the release button with
the other hand, then the tank will pop up. (pic 1)
• To install the tank, aim the tank to the unit, put the bottom of the tank to the edge of the unit,
and then press the tank to click, installation completed. (pic 2)
INSTRUCTION FOR DIRTY WATER TANK INSTALLATION AND DISASSEMBLY
• To take out the dirty water tank, hold the unit with one hand and press the release button with
the other hand, then pull out the tank. (pic 3)
• To install the tank, put the bottom of the tank to the unit, and then push the tank softly to click,
installation completed. (pic4)
23