Change The Size Setting - Brother P-Touch 1800 User Manual

Size
setting (in
points)
24
36
To change the size setting:
1
While holding down
play the current size setting.
2
While still holding down
ting is displayed and is shown by the size indicator.
The current character size setting is also shown by the size indicator above
the display.
3
Release
With the AUTO setting selected and 3/4" (18-mm)-wide tape installed, text
consisting of just one line of only capital letters will be printed with a charac-
ter size of 48 points.
50
Width function OFF
, press
to apply the selected size setting to the entire text.
Size
once, and keep
, continue pressing
Width function ON
held down to dis-
Size
until the desired size set-