Laser Pegs PB1420B Instructions Manual

Please read this manual before you begin!
PB1420B
Failure to follow this manual's instructions may
result in damage to the Power Base and/or
POWER BLOCK
Laser Pegs®. Not adhering to these instructions
Construction
will void the manufacturer's warranty. The
packaging must be kept because it contains
Series
important information.
Ages 5+
8 Models+
WARNING:
Any creation you can build
CHOKING HAZARD
-
Small parts.
LIGHTED
Not for children under 3 yrs.
Do not submerge in water.
MOBILE POWER BLOCK™ SET
INCLUDES:
• 100 Tinted Bricks
• 4 Tire Pegs
DO NOT SUBMERGE IN WATER
• 2 Square M-M Pegs
• 1 Mobile Power Block™
Requires 3 AAA Batteries
Batteries NOT
EN71, RoHS COMPLIANT
Included
This product complies to
all safety requirements
of ASTM F 963
MODEL INSTRUCTIONS
All additional model instructions can
be downloaded at www.LaserPegs.com
Laser Pegs® Parts List
x2
SQUARE
M-M PEG
MOBILE POWER BLOCK™
x4
TIRE PEG
Each Laser Peg® is color coded on the circuit board inside
Color
each shape.
Code
Tinted Bricks List
x2
x6
x2
x8
x8
x8
x2
x4
x2
x4
x1
x2 x2
x8
x2
x4
x4
x2
x2
x2
x2
x1
x4
www.LaserPegs.com
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2014 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: Support@LaserPegs.com
Connecting Pegs
To construct with Laser Pegs®, slide two pieces together to form
a connection. Slide each piece on and off smoothly.
POWER BLOCK
The Power Block is a Power Base that allows you to build with Laser Pegs®
and construction parts to build models that light up. It is battery operated.
(BATTERIES NOT INCLUDED.)
Laser Pegs®
Construction Part Connections
Connections Allows you to connect to other
construction kits.
Allows you to construct
with Laser Pegs®.
Power
Switch
Requires 3-AAA Batteries
Move the Power Switch to
cycle through the Power
Block light settings.
OFF/ON/FLASH
The toy is not to be connected to more than
x2
the recommended number of power supplies
LIGHT SETTINGS
x2
OFF - Turns lights OFF
x2
ON - Turns lights ON
x2
FLASH - Makes lights FLASH
x4
WARNING: STROBE LIGHTS WARNING: STROBE LIGHTS
MAY CAUSE SEIZURES MAY CAUSE SEIZURES
x2
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
x4
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won't. When the Laser Pegs® dim, the Laser Pegs®
are not broken, they just need stronger batteries.
You have 2 simple options...
1. Change the batteries.
2. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more Laser Pegs® you connect!
Replacing Batteries
1. Remove Screw.
2. Lift off Battery Compartment Cover.
3. Place three (3) AAA batteries in the correct
position - as displayed inside of the
Power Block.
4. Replace Battery Compartment Cover and
Screw.
5. Slide Power Switch setting to
OFF/ON/FLASH.
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the power base.
9. Never connect more than 30 Laser Pegs® at
one time!
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be short-
circuited.
15. DO NOT THROW BATTERIES INTO FIRE!
Remove the Phillips head screw
with a 4mm screw driver.
Requires 3-AAA Batteries
Batteries NOT
Included
Tire
Battery
Compartment
(Batteries Not Included)
Axle Peg
POWER BLOCK
Use the Laser Pegs® Square M-M Peg to attach
the Tire Pegs to the Power Block™.
Laser Pegs® Square M-M Peg
MOBILE POWER
BLOCK™
Screw
Battery
Compartment
Cover
Connecting the Laser Pegs® Tire to the Axle Peg
Place Axle Peg
through the Tire
™
Tire Peg
This Product contains a button battery. If swallowed, it could
cause severe injury or death in just 2 hours.
Seek medical attention immediately.
Battery
Compartment
-
+
+
- +
-
-
+
Requires 3-AAA Batteries
Tire Peg
AVOID DAMAGE TO PEG HOLES
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.
Never connect more than 30 Laser Pegs®
to the Power Block at one time.