Mitsubishi Electric MELPRO A Series Instruction Manual page 13

1. Procedure of drawing out
Cover
Drawer fixing screw
① Open the cover and remove the
drawer fixing screw.
2. Procedure of housing
① Support the frame of subunit and
place the subunit in the case
along the rails.
② Close the cover and pull out the
subunit with your finger hooked
on the drawer handle on both
sides.
② Insert the subunit into the case
horizontally.
13
③ Support the frame of subunit and
pull out.
Cover
Drawer fixing screw
③ Open the cover and tighten the
drawer fixing screw.
JEP0-IL9556