Advertisement
INSTALLATION GUIDE
NI PXI Carrying Case
Features
Dimensions
What You Need to Get Started
The NI PXI Carrying Case may be used to transport a 4-, 6-, or 8-slot
NI PXI or PXI Express chassis/system, and/or the NI PMA-1115 Portable
Monitor Accessory. The case ships with pre-scored open cell polyurethane
foam that can be customized to your needs.
❑
Rugged, watertight design with o-ring seal
❑
Customizable open cell polyurethane foam
❑
Retractable pull handle and folding carry handles
Internal ................................................... 54.28 cm × 41.43 cm × 31.90 cm
External .................................................. 63.02 cm × 49.20 cm × 35.23 cm
❑
A PXI or PXI Express chassis/system and/or NI PMA-1115 accessory
❑
An NI PXI Carrying Case
❑
(Recommended) Toothpicks or similar to mark the outline of the
equipment on the foam when determining layout
(21.37 in. × 16.31 in. × 12.56 in.)
(24.81 in. × 19.37 in. × 13.87 in.)
Advertisement
Table of Contents
Summary of Contents for National Instruments NI PXI Carrying Case
- Page 1 INSTALLATION GUIDE NI PXI Carrying Case The NI PXI Carrying Case may be used to transport a 4-, 6-, or 8-slot NI PXI or PXI Express chassis/system, and/or the NI PMA-1115 Portable Monitor Accessory. The case ships with pre-scored open cell polyurethane foam that can be customized to your needs.
- Page 2 Leftover foam may be cut to a proper height to elevate smaller equipment for accessibility. National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Need help?
Do you have a question about the NI PXI Carrying Case and is the answer not in the manual?
Questions and answers