Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for A.caminetti 4D
- Page 1 MANUAL OF USE INSTALLATION & OPERATION OUTDOOR 4D FIREPLACE www.acaminetti-factory.com...
- Page 2 CONTENTS 1. INTRODUCTION. 2. NOTE BEFORE INSTALLATION 3. ASSAMBLY INSTRUCTIONS 4. FUEL CHOICE 5. PLACEMENT FROM NON COMBUSTIBLE MATERIALS 6. POSITIONING OF THE OUTDOOR FIREPLACE 7. STARTUP AND OPERATION 8. CLEANING AND MAINTENANCE 9. WARRANTY...
- Page 3 Thank you for your trust and for choosing A.Caminetti 4D outdoor fireplace ! We can be confident that our commitment to designing and manufacturing fireplaces will bematched by your satisfaction in making this excellent choice. Please read all the sections in thisManual carefully before starting any installation work and use.
- Page 4 - Do NOT use in an explosive atmosphere. Keep the area clear from combustible materials. - Do NOT use the A.caminetti outdoor fire under any overhead or near any unprotected combustible constructions avoid using near or under overhanging trees or shrubs.
- Page 5 ASSEMBLY INSTRUCTION The heater is delivered in a ready-to-be-installed state. Remove the packaging and check theappliance for completeness according to this Operation Manual. You should also ensure thatthe following are operational. POSITIONING THE OUTDOR FIREPLACE AT A SAFE DISTANCE The fireplace should be positioned on a non-flammable floor - Always use the outdoor fireplace on a hard, level non-combustible surface, Asphalt may not be acceptable for this.
- Page 6 FLANGE POSITIONING For connecting the flange with the main body follow the steps as in photos below. Remove first the metalic circle of the main body as in (fig.1b).Place easily the connection flange which is packaged inside the fire body (fig.1c).Place the screws than in the side spaces, to fix the flange on the body as in (fig.1d).Finally set the matalic circle on its first position (fig.1e).
- Page 7 OUTDOOR FIREPLACE MATERIAL NEEDED -A few larger wooden billets (split; max. humidity 20%; approx. 10-13 cm)- a handfulof splints for kindling (dia. approx. 2-5 cm ; max. humidity 20%,) -Tinder of choice -Matches/Lighter. Lighting 1. Open Door 2. Stack logs as shown use logs that are no more than 350mm Long. 3.
- Page 8 NORMAL OUTDOOR FIREPLACE BURNING AND EXTINGUISHING To prevent flue gases from escaping during the heater’s operation, the door should be closed at all times, except for lighting, fuel loading and removing ash. Do not leave the site while lighting the fire when the door is open. CHIMNEY-FLUE MAINTENANCE A well-cleaned and maintained chimney provides the basis for correct and safe stove operation.
- Page 9 DOOR OPENING Door on the outdoor fireplace is easily opened as below.Always use the door accessory and gloves if its nessesary. 3a) Door accessory ASH REMOVAL Ash should be removed prior to each time you light the stove. To remove the ash, just empty the ash container located below the fire grate.
- Page 10 If the chips are down and your outdoor fireplace needs repairing under the warranty, you must be able to present a dated and signed invoice stating the name of the dealer and the model. In case of repairs under the warranty, the parts and labor costs will be covered by A.caminetti. THANK YOU FOR CHOOSING "A.CAMINETTI"!
- Page 11 A.caminettti GmbH AM Industriegleis 6a,Ergolding / Germany. info@acaminetti-factory.com www.acaminetti-factory.com...
Need help?
Do you have a question about the 4D and is the answer not in the manual?
Questions and answers