Product Information; Installation; Voltage Specification; Operation - Flash F5300002 User Manual

3. PRODUCT INFORMATION

Power supply voltage: 110-240V
Power consumption: 3000W
Operation area: height-3m, range-50m
Housing made: Steel
Dimension [cm]: H-64 W-64 D-64

4. INSTALLATION

Make sure all necessary cables are properly
connected. Always ensure that the unit is
firmly fixed to avoid vibration and slipping
while operating. Always ensure that the
structure to which you are attaching the
unit is secure and is able to support a weight

4.1 Voltage specification

Input Voltage
110-240V

5. OPERATION

1. First, check the switches on the control panel. Make sure they are all turned off.
2. Set the right angle of the device - maximum 45 degrees.
3. Place the pump in a container with foam.
4. Turn on the fan and let it run for about 30 seconds.
5. Turn on the pump. WARNING! Before turning off the pump, the fan should run for
approx. 30 seconds.
6. After finishing work, turn off the device and clean it thoroughly.
MEGA FOAM MACHINE • Art No F5300002
Weight [kg]: 35
Weight with packaging [kg]: 40
Type of packaging: Carton Box
of 10 times of the unit's weight. Also always
use a safety cable that can hold 12 times
of the weight of the unit when installing
the fixture. The equipment must be fixed
by professionals. And it must be fixed at a
place where is out of the touch of people
and has no one pass by or under it.
Total Power
3000W
Frequency
50/60Hz