Summary of Contents for Net Safety VID-C
- Page 1 Colour Explosion Proof Video Camera USER MANUAL VID-C Part Number: MAN-0036-00 Rev 4...
- Page 3 This manual is a guide for the use of a VID-C and the data and procedures contained within this document have been verified and are believed to be adequate for the intended use of the camera . If the camera or procedures are used for purposes other than as described in the manual without receiving prior confirmation of validity or suitability, Net Safety Monitoring Inc.
-
Page 4: Table Of Contents
Figure 3 W iring diagram for the VID-C colour video camera ...... -
Page 5: Chapter 1 Introduction
Chapter 1 Introduction Description The Net Safety Monitoring Inc. VID-C explosion proof video camera is ideally suited for safety monitoring systems in hazardous locations. The color video camera, mounted in an explosion proof housing, delivers a composite video output for use with most VCR's or video monitors. The wide viewing angle provides for large area coverage by one camera. -
Page 6: Chapter 2 Installation And Start Up
Location of Camera(s) Proper location of the VID-C is essential for providing maximum coverage. The most effective placement and numbers of cameras varies depending on the location. Experience, common sense, and knowledge of the area will determine the number of cameras needed and the best locations to monitor the area adequately. - Page 7 Figure 1 VID-C Dimensional Diagram...
- Page 8 Figure 2 Swivel Mount...
-
Page 9: Vid-C Wiring
VID-C Wiring NOTE The VID-C contains semiconductor devices that are susceptible to damage by electrostatic discharge. An electrostatic charge can build up on the skin and discharge when an object is touched. Therefore, use caution when handling the device, taking care not to touch the terminals or electronic components. For more information on proper handling, refer to 'Electrostatic Sensitive Device Handling Procedure', in Appendix A. - Page 10 “noise”. Refer to applicable wiring codes when installing and wiring the VID-C. After the field wiring has been carefully connected, check that the correct wires are connected to the corresponding terminals and that voltage levels do not...
-
Page 11: Installation Checklist
Chapter 3 Troubleshooting The VID-C is not designed to be repaired in the field. If a problem should develop, carefully check for correct wiring. If it is determined that the problem is caused by an electronic defect, the device must be returned to the factory for repair. -
Page 12: Chapter 4 Maintenance
Chapter 4 Maintenance To ensure reliable viewing, it is important to periodically clean the camera window. Although the frequency of this cleaning is determined by the requirements of the particular process, it is recommended that the VID-C be cleaned every year. -
Page 13: Appendix A Technical Specifications
Appendix A Technical Specifications Operating Voltage: 12V to 32 V Power Consumption (at 24 Vdc): 2.0 W atts nom inal. 70 m A nom inal. Operating Temperature: -25 C to +60 C (-13 F to +140 F). Storage Temperature: -40 C to +60 C (-40 F to +140 F). Resolution: Horizontal 350 TV lines. -
Page 14: Appendix B Electrostatic Sensitive Device Handling Procedure
Net Safety Monitoring Inc. modules that might be damaged by static electricity are carefully wrapped in a static protective material before being packaged. Foam packaging blocks are also treated with an anti-static agent If it should ever become necessary to return the module, it is highly recommended that it be carefully packaged in the original carton and static protective wrapping. - Page 16 Distributed By: 2721 Hopewell Place NE Calgary, Alberta, Canada T1Y 7J7 Telephone: (403) 219-0688 Fax: (403) 219-0694 www.net-safety.com E-mail: netsafe@net-safety.com...