System Menu - Serene SEREONIC ALERT CA-360Q User Manual

EN

SYSTEM MENU

Press SPK + Alarm-1 +
SYSTEM
MENU
Note: Press RESET at any time will exit the menu
General CA-AX Alerts Enable / Disable
1
a.
Press or button to scroll and highlight this icon
b.
Press the MODE button to enable / disable the function. An
icon will show on the display when enabled.
When function is enabled, the unit will sound the alerts when ANY
audio transmitter (CA-AX) that is in range and has been activated.
Note: The periodic check-in and low battery signals from these
non-registered CA-AX units will not be acknowledged by the
CA-360Q, so no warning messages will be generated.
15.
buttons for 2 seconds to initiate
1
2
www.sereneinnovations.com