Jarv Elite User Manual

Device Overview
Wristband
How to wear your Elite Fitness Band?
1
Attach your Elite Fitness Band to
your wrist
Put on the wristband with the screen facing up and the band
wrapped around your wrist. Align the METAL CLASP along
the band to find the hole that best fits your wrist size.
*Please make sure to fasten with the METAL CLASP and not
the smaller plastic clasp.
3
Charge your Elite Fitness Band
To charge your Elite Fitness Band, place it in the charging box at
the other end of the USB cable. Close the box afterwards, and
make sure the Elite Fitness Band is securely covered and that
the charging contacts are properly aligned. Plug the USB
connector to either a PC or power adapter to start charging.
Initial charging time is approximately 2 hours.
For warranty information, troubleshooting or other customer service needs please visit www.jarvmobile.com
Register your product online at www.jarvmobile.com to receive a free 6 month warranty extension
Jarv Elite Fitness Band and Smart Watch
Touch sensor
button
Core
Metallic contact for charging
2
Fasten your Elite Fitness Band
with the metal clasp
Press down on the METAL CLASP into the holes of the wristband
until you hear a click indicating that the band is securely fastened
4
Change the wristband
1
2
1. Spread open both bands with the screen facing up, and press down
the screen with your thumb until the core comes off the wristband.
2. Insert the core with screen facing up into the notch from below the
wristband. Button up the clasp on the side of the band with 2 holes.
Please note that the charging contact should be near the clasp.
EN
User Manual
Clasp