Summary of Contents for Direct IP IDIS DA-PI PoE75U
- Page 1 PoE Injector High-PoE Power Source Injector, 10/100/1000 Mbps LAN Operation Manual DA-PI PoE75U Powered by...
-
Page 2: Before Using The Product
Before Using the Product FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 3: Product Features
Product Features ● Up to 75W of PoE Power ● Compatible with IEEE 802.3af/at ● Protects low power devices to receive only the power they need ● Automatic detection and protection of non–standard Ethernet terminals ● Supports 10/100/1000 Base-T LAN environment ●... - Page 4 Overview Front CONNECT FAULT AC/IN 100-240V Back CONNECT FAULT Data & Power Out Data In Insert the AC power cable to the main unit to turn the AC/IN 100-240V device On. Sends power and data received via Data In port over UTP Data Power Out cable.
-
Page 5: Installation
Installation Connect the AC power cable to DA-PI PoE75U. Make sure that the power LED (Green LED at the top) is lit. Connect the Video In port of DirectIP™ NVR and Data In port of DA-PI PoE75U using a UTP cable. Connect the DATA &... -
Page 6: Specifications
Specifications Model DA-PI PoE75U Power Input Port 10/100/1000 Mbps Transfer Speed Power Pin Allocation OUTPUT #1(OUT) 3/6 (+), 1/2 (–) OUTPUT #2(OUT) 4/5 (+), 7/8 (–) Power Output 56 V DC, 75W Max Power Input 100 ~ 240 V~, 50/60Hz, 2.0A Dimensions (W)X(D)X(H) 80 X 166 X 44 (mm) Weight... - Page 8 IDIS Co., Ltd. For more information, please visit at www.idisglobal.com...
Need help?
Do you have a question about the IDIS DA-PI PoE75U and is the answer not in the manual?
Questions and answers