Advertisement
6
4
3. OPERATION
3.1
Measuring
3.1.1
With the vehicle ignition OFF, remove the fuse from the circuit to be tested and insert it into the fuse
jack (fig.1.3), this ensures the correct level of circuit protection.
3.1.2
Insert the plug with the correct adaptor fitted, Maxi: fig.1.1, standard: fig.1.1.1 or mini: fig1.2) into the
vehicle fuse socket.
3.1.3
Switch on the vehicle ignition if required, to energise the circuit and then switch on the TA125 fig.1.8.
3.1.4
Operate the circuit under test and the LCD will display the measured current.
WARNING!
The Fuse blade may become hot during testing. Allow to cool before removing.
p
3.2
Peak and Hold Function
The Hold function allows the meter to freeze a measurement for later reference. The Peak function
captures the peak current measured during the test.
3.2.1
Press the HOLD/PEAK button to freeze the reading on the LCD display. The HOLD message will
appear in the display.
3.2.2
Press the HOLD/PEAK button again to return to normal operation.
3.2.3
Press the HOLD/PEAK button for 2 seconds, 'PEAK' will appear in the display, to return to normal
operation, press the HOLD/PEAK button again.
4. MAINTENANCE
4.1
Battery Replacement
Power is supplied by a 9V PP3 battery. The 'BAT' symbol appears on the LCD display when
replacement is required.
WARNING!
To avoid electric shock ensure all inputs are disconnected from any circuit before
p
removing the battery cover.
To replace the battery, remove the screw from the back of the unit and remove the cover.
Remove the exhausted battery and replace with a new observing the connection polarity.
Replace cover.
4.2
Cleaning
Clean using a soft damp cloth.
Store in a safe, dry, childproof location.
Declaration of Conformity We, the sole importer into the UK, declare that the product listed here is in conformity with the
following standards and directives.
Model: TA125
2002/95/EC RoHS Directive
2002/96/EC WEEE Directive
93/68/EEC CE Marking Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. IMPORTANT: No liability is accepted for incorrect use of product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be
required for any claim. INFORMATION: For a copy of our latest catalogue call us on 01284 757525, leave your full name and address, including postcode.
1. Maxi Blade Type
1.1 Standard Blade Adaptor
5
2. Mini Blade Adaptor
3. Fuse Jack (Maxi Blade Type)
4. Lead
7
5. LCD display
6. Zero Button
8
7. Hold / Peak button
8. Power ON / OFF Button
The construction file for this product is held by the Manufacturer and may be
inspected, by a national authority, upon request to Jack Sealey Ltd.
Signed by Tim Thompson
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
Press to Release Adaptor
When fitted to 1. Maxi Blade
1.1
1
3
.
24th November 2008
01284 757500
01284 703534
email
TA125
fig.1
2
www.sealey.co.uk
W e b
sales@sealey.co.uk
Issue No: 1 - 11/11/08
Advertisement
