Advertisement
5.4.
To remove a drawer with roller sliders, pull the drawer completely out, press down the right tab and lift up the left tab, pull drawer off
the slides To reinstall the drawer, realign with the internal drawer slide and push until it locks in place (fig.3).
5.5.
Fit bottle opener to the left hand (handle) end of the cabinet using two M6 x 16 mm bolts.(fig.4).
5.6.
Mounting holes for an additional power rail (EL34USBB - not included) are provided at both ends of the cabinet and mounting bolts
(item 4) are provided with the cabinet.
IMPORTANT: To avoid tipping, open one drawer at a time and close and secure all drawers whilst moving the rollcab/units.
6. MAINTENANCE
6.1.
Periodically lubricate wheel axles and tighten all nuts and bolts.
6.2.
Keep all surfaces clean. Brush off and wipe down with damp cloth and mild detergent to maintain finish.
6.3.
Lubricate the drawer slides sparingly every six months.
6.4.
Stubborn grease and oil marks can be removed by using a non-abrasive cleaner.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
fig.2
fig.3
fig.4
www.sealey.co.uk
AP6310BE Issue 1 29/01/19
Advertisement
