Advertisement
4. APPLICATION AND OPERATION
Note! This procedure applies only to electro-mechanical relays.
4.1.
Sourcing the faulty relay (solenoid).
4.1.1
read these instructions in conjunction with automobile manufacturers manual to establish proximity and function of relays and fuses.
4.1.2
remove the suspect relay and check the connections for any signs of overheating or of corrosion. If there appears to be any damage,
replace with an identical brand-new relay.
4.1.3
If there is no apparent damage the function can be checked with the relay tester.
4.2.
Testing relay function
4.2.1
With the ignition switch off connect the red crocodile clip of the relay tester to the positive terminal of the vehicle battery.
4.2.2
connect the black crocodile clip to the negative terminal of the vehicle battery.
4.2.3
select either a 4PIn socket or a 5PIn socket with the selector switch on the relay tester.
4.2.4
Plug in the relay to be tested and press the test button.
4.2.5
test feature will cycle the relay ten times, testing the resistance, contacts and consistency within each cycle. If a cycle fails on the test
then this will be indicated by a red LED and alternatively a green LED if the relay works.
4.2.6
If the relay fails replace it with an identical brand-new relay.
5.
MAINTENANCE
WARNING! DO NOT attempt to repair or service unless you are qualified to do so and have the relevant calibration, performance test,
and service information. to avoid electrical shock or damage to the tester do not get water inside the case.
5.1.
Periodically wipe the casing and flying leads with a damp cloth and mild detergent. DO NOT use solvents.
5.2.
After each use wipe clean the crocodile clips with a lightly oiled cloth.
5.3.
DO NOT store in a place of high humidity or high temperature.
recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner which is compatible
with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
contact your local solid waste authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey Limited 2013
Environmental Protection.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7Ar
Original Language Version
01284 757500
Web
01284
703534
email
www.sealey.co.uk
sales@sealey.co.uk
tA131 Issue: 1 - 28/03/13
Advertisement
