Advertisement
Quick Links
VEHICLE CONTROLS
Learn about the various controls necessary for operating and driving the
vehicle.
Using the Smart Entry Remote
Lock or unlock the doors and trunk.
Locking the doors: Press the lock button once to lock all doors. Press
twice to hear audible verification for setting the security alarm.
Unlocking the doors: Press once to unlock the driver's door and fuel fill
door. Press twice to unlock remaining doors.
Unlocking the trunk: Press the trunk release button for approximately
one second to unlock and open the trunk.
To engage panic mode: Press the panic button once to sound the panic
alarm for approximately 30 seconds. Press any button on the remote
transmitter to cancel panic mode.
To engage the remote engine start: Press the lock button, then press
and hold the engine button to turn the power system on for up to 10
minutes.
NOTICE
Leaving the smart entry remote in the vehicle can result in theft or accidental
movement of the vehicle. Always take it with you whenever you leave the
vehicle unattended.
Release Knob
Built-in Key
Lock button
Unlock button
Trunk release button
Engine button
Panic button
VEHICLE CONTROLS
Advertisement
Summary of Contents for Honda Smart Entry Remote
- Page 1 10 minutes. NOTICE Leaving the smart entry remote in the vehicle can result in theft or accidental movement of the vehicle. Always take it with you whenever you leave the vehicle unattended.
- Page 2 VEHICLE CONTROLS Smart Entry System When you carry the smart entry remote, you can lock/unlock the doors, fuel fill door and open the trunk. You can lock/unlock the doors and fuel fill door within a radius of about 32 inches (80 cm) of the outside door handle. You can open the trunk within about 32 inches (80 cm) radius from the trunk release button.
- Page 3 When you walk away from the vehicle while carrying the smart entry remote, the doors can automatically lock if the following conditions are met: • The smart entry remote is within a range of 5 feet (1.5 m). • All doors and the hood are closed.
- Page 4 H logo on the smart entry remote while the POWER button is flashing. The buttons on the smart entry remote should be facing you. 2. Press the brake pedal and press the POWER button within 10 seconds...