Sony BDKP-N1001 Operation Manual

NETWORK ADAPTER BOARD
BDKP-N1001/N1002/N1003/N1004
For the customers in the USA
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
For the customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
Für Kunden in Deutschland
Dieses Produkt kann im kommerziellen und in begrenztem
Maße auch im industriellen Bereich eingesetzt werden.
Dies ist eine Einrichtung, welche die Funk-Entstörung nach
Klasse B besitzt.
OPERATION GUIDE (Revised 1)
BDKP-N1001/N1002/N1003/N1004 (SY)
3-867-035-02 (1)
Sony Corporation
Broadcasting & Professional Systems Company
Caution (for BDKP-N1002 only)
This Network Adapter Board is classified as a CLASS 1
LASER PRODUCT.
The CLASS 1 LASER PRODUCT label is located on the rear
panel.
Diese Netzwerkadapterkarte ist klassifiziert nach LASER
KLASSE 1 PRODUKT.
Das LASER KLASSE 1 PRODUKT-Label befindet sich auf
der Rückseite.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CAUTION
The use of optical instruments with this product will increase
eye hazard.
Laser Diode Properties
Material:
Wave length:
Emission duration:
Laser output power:
Daten der Laserdiode
Material:
Wellenlänge:
Emissionsdauer:
Laser-Ausgangsleistung:
Laserdiode data
Materiale:
Bølgelængde:
Strålingsvarighed:
Lasereffekt:
Laserdiodens egenskaper
Material:
Våglängd:
Strålningstid:
Laseruteffekt:
Laserdiodens egenskaper
Materiale:
Bølgelengde:
Emisjonslengde:
Laser utgangseffekt:
[Japanese/English/German]
InGaAsP
1300 nm
Continuous
0.16 mW
InGaAsP
1300 nm
Kontinuierlich
0,16 mW
InGaAsP
1300 nm
Kontinuerlig
0,16 mW
InGaAsP
1300 nm
utan avbrott
0,16 mW
InGaAsP
1300 nm
Kontinuerlig
0,16 mW
Printed in Japan
1999.08.13
© 1999