Download Print this page

Use Of The Device; Settings; Set Impulse Mode & Tone Mode - CSS MicroSystems AssistX AS one Instructions For Use Manual

Table of Contents

Available languages

36 | Instructions for Use AssistX AS one

8. Use of the device

Connect the device with the enclosed appropriate cable to the

As-

of your CSS product. Place the AS one sensor near the

sistX Port

user, if necessary with an appropriate CSS holder. Because the sensor

is magnetic, it adheres to all iron and steel surfaces. Follow now the

steps of 9. Settings.

AS one can learn the frequency that triggers a sensor reaction. The

sensor reacts to noise that comes with defined frequency and volume

and that is held for an adjustable duration. Optional, in impulse mode

the sensor reacts to any noise that reaches an adjustable volume.

Set Impulse Mode & Tone Mode:

Plug the jack cable into the

. Then press and hold

AssistX AS one

the

tone range button for tone mode or the

time range button

for impulse mode and then insert the plug on the other side of the

cable on the

device or

. Press and hold the desired

AssistX

Clickman

button for 1 sec after inserting it. As soon as the button is released,

LED lights up red or green and the selected mode is active.

the

Table of Contents

Table of Contents

Do you have a question about the AssistX AS one and is the answer not in the manual?