Table of Contents
Advertisement
Quick Links
I
INSTRUCTIONS FOR
150kg Log Stand
IMPORTANT:PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF
THIS PRODUCT
GENERAL INFORMATION
These instructions accompanying the product are the original instructions.This
document is part of the product,keep it for the life of the product passing it on to any
subsequent holder of the product. Read all these instructions before operating or
maintaining this product.
This manual contains all the necessary information to ensure it correct and safe use.
By following all the general safety instructions contained in this manual,it will ensure
both product and operator safety,together with longer life of the product itself.
Advertisement
Table of Contents
Related Manuals for TOPMAQ LOHA2110
Summary of Contents for TOPMAQ LOHA2110
- Page 1 INSTRUCTIONS FOR 150kg Log Stand IMPORTANT:PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT GENERAL INFORMATION These instructions accompanying the product are the original instructions.This document is part of the product,keep it for the life of the product passing it on to any subsequent holder of the product.
- Page 3 1. INSTRUCTION 1.1 SCOPE This log stand is manually operated saw horse,designed to enable the efficient and safe sawing of logs and branches. Its powder coated steel construction means it is suitable for home/DIY use by professional aborists for the sole purpose of sawing logs upto 150kg in weight. 1.2 SPECIFICATION Max.
- Page 4 2.TECHNICAL DESCRIPTION 2.1 INDENTIFICATION Log support frame ○ Cross bar ○ Teeth ○ Base ○ Diagonal brace ○ Brace pin ○...
- Page 5 3. OPERATING THE LOG STAND 3.1. OPERATING THE LOG STAND Ensure that the ground on which you are placing the log stand is firm and level. With the log stand lying on the ground, lift the log support frame into the vertical position.
- Page 6 4. OPERATING THE LOG STAND 4.1 OPERATING THE LOG STAND Insert the log through the teeth in the direction shown,until approximately 1/3 of the log length is forward of the log support frame. The log should be angled so that the short end of the log is slightly lower than the rear.
- Page 7 behind. WARNING: Always cut in a downward direction as shown. WARNING: Check that the log is secure and the log stand is stable before beginning to cut. IMPORTANT: Please read these instructions carefully. Note the safe operational requirements,warnings and cautions. Use the product correctly and with care for the purpose for which it is intended.
Need help?
Do you have a question about the LOHA2110 and is the answer not in the manual?
Questions and answers