Table of Contents
Advertisement
HYDRAULIC BRUSHED PUMP M3 7.4 V / 11.1 V
SPECS:
• Pressure: up to 23 bar.
• Voltage: 7.4 V – 11.1 V
•
No relief valve. *Bear in mind that this pump cannot run continuously.
•
Oil tank required.
INSTRUCTIONS
1. screw the racor holder.
EXPLODED VIEW
M3 x 8
M3 x 12
(x2)
(x4)
Please note that this product is not a toy and not suitable for youngters under the age of 16. Technical details may be
subject to changes and modifications. All images and designs are property of MAGOM HRC. For any doubts or
questions, please contact us throught www.magomhrc.com.
2. Screw the racor spike.
www.magomhrc.com
Connect the hose
carefully
to
the
pump.
Be sure that the
tank
and
speed
controller setup is
ok.
503001-301
Motor gear 3.14 mm
MG-913-C024120
Idle gear 3.05 mm
MG-913-C019457
Advertisement
Table of Contents
