Table of Contents
Advertisement
3.2
Main Line
Setting "transmit all" is intended only for testing use. Please do not use for normal operation.
If the parameter "Send confirmation on own telegrams" is set to "yes", MECip-Sec
systematically sends an ACK on any own routed telegram. For example, since repeaters
do not use filter tables, it is useful to have an ACK sent along with routed telegrams.
Table 8: Main Line Tab Parameter Settings
ETS Parameter
Telegram routing
Group telegrams:
Main group 0...13
Group telegrams:
Main group 14...31
ETS Database Parameters Coupler
Figure 9: Main Line Tab Parameters
Settings
[Factory Default]
Group: filter, Physical: block
Group and Physical: filter
Group: route, Physical: filter
Group and Physical: route
configure
[Group and Physical: filter]
transmit all
(not recommended)
block
filter
[filter]
transmit all
(not recommended)
block
filter
[filter]
Comment
block:
no telegrams are routed.
telegrams entered in the
filter:
filter table are routed.
route:
all telegrams are routed.
the following parameters
configure:
must be set manually.
Group telegrams (main group 0...13)
are all routed.
Group telegrams (main group 0...13)
are all blocked.
Group telegrams (main group 0...13)
are routed if entered in the filter table.
Group telegrams (main group 14...31)
are all routed.
Group telegrams (main group 14...31)
are all blocked.
Group telegrams (main group 14...31)
are routed if entered in the filter table.
MECps
- 19 -
Advertisement
Table of Contents
