Behlen Country 80900240 Quick Start Manual

Behlen Country 80900240 Quick Start Manual

Tillage discs sub compact, medium, & heavy duty

Advertisement

Quick Links

Tillage Discs
Sub Compact, Medium, & Heavy Duty
Congratulations on your purchase. Behlen Country has been in the business of providing
quality equipment to landowners for more than 80 years. Our 3-Point Equipment will provide
many years of service when maintained by the operator and used in accordance with the
capabilities of the product. For questions about this product, or for parts inquiries, please
This manual contains valuable information about
your new Tillage Disc. It has been prepared to
give you helpful suggestions for safety, operation,
adjustment and service.
It is the owner's and or operator's responsibility to:
• Read and understand the information contained
in this manual. The use of this equipment is
susceptible to certain hazards that cannot be
protected against by mechanical means or
product design. All operators of this equipment
It is the policy of Behlen Country to improve its products where it is possible and practical to do so.
Behlen Country reserves the right to make changes or improvements in design and construction at any
time, without incurring the obligation to make these changes on previously manufactured units.
F-20864-2
THANK YOU FOR PURCHASING THIS PRODUCT
contact our Customer Service Center listed below
TO THE CUSTOMER
STATEMENT OF POLICY
CUSTOMER SERVICE CENTER
PO Box 569
Columbus, NE 68602-0569
TECHNICAL INFORMATION 70160
must read and understand this entire manual,
paying particular attention to safety and
operating instructions, prior to using.
• Assemble, operate and maintain the equipment
in accordance with all instructions and safety
procedures in this manual.
• Inspect the equipment prior to each use and
replace or repair any parts that are worn or
damaged.
www.behlencountry.com
Hardware Kit
80900240
Ph: 800-447-2751
Fax: (402) 563-7447
Rev. 4-4-19 1-17-11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 80900240 and is the answer not in the manual?

Questions and answers

Summary of Contents for Behlen Country 80900240

  • Page 1 All operators of this equipment STATEMENT OF POLICY It is the policy of Behlen Country to improve its products where it is possible and practical to do so. Behlen Country reserves the right to make changes or improvements in design and construction at any time, without incurring the obligation to make these changes on previously manufactured units.
  • Page 2 SAFETY more careful approach to handling equipment. You, the operator, can avoid many accidents by READ AND FOLLOW THE INSTRUCTIONS IN observing the following precautions and insist THIS MANUAL, ESPECIALLY IN THE SAFETY those working with or for you adhere to them. SECTION.
  • Page 3 • Do not modify the implement in any way. tractor - particularly during a rollover when the Unauthorized modifications could result in operator could be trapped under the ROPS or serious injury or death and may impair the the tractor. function and shorten the life of the equipment •...
  • Page 4: Attaching To Tractor

    ATTACHING TO front wheels, you must not exceed the ROPS weight certification. Weigh the tractor and TRACTOR equipment. Do NOT guess or estimate! Never stand, or allow anyone else to stand, • The Medium and Heavy Duty Tillage Discs are between the tractor and the Tillage Disc while designed to fit Category 1 tractors equipped backing the tractor up to the hitch.
  • Page 5: Transport Safety

    and can cause rollover accidents. adjustment positions for the front and rear. On soils with light to medium plant cover, it is Before adjusting, raise Disc off the ground. usually acceptable to disc the ground once or Adjust the desired angle by removing the bolt(s) twice to cut up the plant growth to prepare the and nut(s), slide the gang to the desired position soil.
  • Page 6: Maintenance

    MAINTENANCE Sealed Bearings All models contain sealed bearings. No • Good maintenance is your responsibility. Poor lubrication is required. maintenance is an invitation to trouble. • Keep service area clean and dry. Disc Replacement • Be sure electrical outlets and tools are properly grounded.
  • Page 7: Troubleshooting Guide

    Before extended storage: • Tractor too small, use larger tractor. • Wash Tillage Disc using low-pressure water • Not enough weight on front end of tractor, add spray. Be careful when spraying around weight. scratched or torn decals or near edges of •...
  • Page 8: Warranty

    PROBLEM: Tall weeds or grass wrap around disc axle Possible Solutions: • Crop residue is too tall. Mow before discing. If wrapping problem occurs on second time over field, change direction or mow second time in different direction. PROBLEM: Disc leaves ridge in center Possible Solutions: •...
  • Page 9: Parts Listing

    Smooth Disc Notched Disc Lift Pin Parts Listing Description Cat 1 Lift Pins Smooth Disc Notched Disc Sub-Compact not available 3018395 Medium Duty 3018352 3018399 3018398 Heavy Duty F-20872 1-17-11...

Table of Contents