Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mosaic QUANTIZER
Summary of Contents for Mosaic QUANTIZER
- Page 1 QUANTIZER Manual...
-
Page 2: Table Of Contents
CONTENTS Things To Know Overview User Interface Details Calibration Appendix For more information, visit www.mosaic1u.com... -
Page 3: Things To Know
If you use the Pulp Logic format, don’t worry! You can purchase Pulp Logic replacement front panels on our format are placement Panels page. Mosaic modules? Mosaic Each color indicates a function across the Mosaic lineup. Green: Audio Signals Color Purple: Gate Signals Guide Blue: Control Voltage... -
Page 4: Overview
OVERVIEW Description Craft melodic sequences out of random voltage, LFOs, and more with the Mosaic Quantizer. Don’t have a voltage source? Enter Arpeggiator mode to create a sequence from your current scale or note pattern, and modify it on the fly using the chromatic note interface. Pull musicality out of the unknown with Quantizer! •... -
Page 5: User Interface
6ms gate output. This is connected to the gate input when no cable is patched to that jack. The quantizer will only update it’s output voltage to the selected note when a gate signals is detected on the gate input jack. By default, the normalization will ensure that the note updates everytime a change is detected. - Page 6 Pressing a second time will change the button state. Scale Storage There are a number of traditional scales that come built into the Quantizer. Visual references are available in the appendix. • Major “Ionian”...
- Page 7 USER INTERFACE Slew (Glide) The slew setting will cause the signal to slide from note to note. Hold the shift ( ) button and press either SLEW button to show the current setting. To adjust the setting tap the corresponding “+” or “-” button while viewing the current setting. The setting will go all the way to showing all LEDs as OFF when slew is disabled (default), and have all 12 LEDs illuminated when increased to its maximum.
- Page 8 USER INTERFACE Operating Mode The module functions in one of three modes at a time. To set the operating mode, hold the shift button and press the desired mode button. In this mode, the trig input will advance the current step in the selected scale. And allow for arpeg- giation of a set of notes.
-
Page 9: Details
DETAILS 1. Trig Trigger sensitive input. A rising edge of voltage greater than 0.3V. In order to be properly detected by the software, the trigger signal must remain above 0.3V for at least 3ms 2. In 1V/Octave input Patch anything in, and get musical CV outputs! Functional within 0-5V 3. -
Page 10: Calibration
CALIBRATION The module is calibrated at the factory. This should only be necessary if you have a specific need to recalibrate (for example, dealing with a different format like Buchla, or an oscillator that doesn’t track accurate 1V/octave) To enter calibration mode, hold the shift button while powering up the module. -
Page 11: Appendix
APPENDIX Default Scales Reference Use this reference sheet to reset the default scales that come with Quantizer. Major (Ionian) Major Pentatonic Dorian Minor Pentatonic Phrygian Harmonic Minor Lydian Whole Tone Mixolydian Chromatic Minor (Aeolian) Locrian For more information, visit www.mosaic1u.com...
Need help?
Do you have a question about the QUANTIZER and is the answer not in the manual?
Questions and answers