Philips FW-C38/21 Service Manual page 9

Controls on the system and
remote control
1 1 1 1 1 STANDBY ON
– to switch the system on or to standby
mode.
– to use for EASY SET.
2 2 2 2 2 DIGITAL SOUND CONTROL
DISPLAY PANEL
– to view the desired DSC display.
3 3 3 3 3 DBB (DYNAMIC BASS BOOST)
– to switch on bass boost, to enhance
bass response or to switch off bass
boost.
4 4 4 4 4 VEC
– to select the desired Virtual
Environment Control effect : HALL,
CINEMA or CONCERT.
5 5 5 5 5 DSC
– to select the desired sound effect :
OPTIMAL, JAZZ, ROCK or TECHNO.
6 6 6 6 6 JOG CONTROL
– to select the desired DSC setting. You
must select the DSC feature first.
– to select the desired VEC setting. You
must select the VEC feature first.
7 7 7 7 7 PROGRAM
for CD ............ to program CD tracks.
for TUNER ..... to program preset radio
stations.
for CLOCK ..... to select 12- or 24-
hour in clock setting
mode.
8 8 8 8 8 MICROPHONE (not available for
version /30)
– to connect microphones jack.
OPERATING THE SYSTEM
C10
FW- MINI HIFI SYSTEM
STANDBY-ON
JOG
C D 1 • 2 • 3
CONTROL
CD
TUNING
SEARCH
PROGRAM RECORD DUBBING A.REPLAY
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
10
9 9 9 9 9 MIC LEVEL (not available for version
/30)
– to adjust the mixing level for karaoke
or microphone recording.
0 0 0 0 0 RECORD
– to start recording on tape deck 2 only.
! ! ! ! ! DISPLAY SCREEN
– to view the current setting of the
system.
@ @ @ @ @ CD CAROUSEL TRAY
# # # # # DISC CHANGE
– to change CD(s).
$ $ $ $ $ OPEN•CLOSE
– to open or close the CD carousel tray.
% % % % % DISC 1 / DISC 2 / DISC 3 (CD
DIRECT PLAY)
– to select a CD tray for playback.
^ ^ ^ ^ ^ SOURCE to select the following:
CD / (CD 1•2•3)
– to select CD mode. When CD playback
is stopped, press to select disc tray 1,
2 or 3.
TUNER / (BAND)
– to select Tuner mode. When in tuner
mode, press to select the waveband:
FM or MW.
TAPE / (TAPE 1• 2)
– to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
AUX (CDR/VIDEO)
– to select sound from an external
source (e.g. TV, VCR, Laser Disc player,
DVD player or CD Recorder).
BAND TAPE 1 • 2 CDR/VIDEO
TUNER TAPE AUX
▲
PRESET
STOP• CLEAR PLAY• PAUSE PREV NEXT
INCREDIBLE
DIM SURROUND
•
CLOCK TIMER
VOLUME
SOUND NAVIGATION - JOG
To stop the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
2-3
& & & & & MODE SELECTION
SEARCH à á (TUNING à á)
for CD ............ to search backward/
forward.
for TUNER ...... to tune to a lower or
higher radio frequency.
for TAPE ....... to rewind or fast
forward on tape.
for CLOCK ..... to set the hour (on the
system only) .
STOP•CLEAR Ç
for CD ............ to stop CD playback or
to clear a program.
for TUNER ..... to stop programming.
for TAPE ........ to stop playback or
recording.
for DEMO ...... (on the system only) to
start or stop
demonstration mode.
PLAY É / PAUSE Å
for CD ............ to start or interrupt
playback.
for TAPE ........ to start playback.
PREV í / NEXT ë(PRESET 43 )
for CD ............ to skip to the beginning
of the current, previous,
or next track.
for TUNER ..... to select a preset
station in memory.
for CLOCK ..... to set the minute (on
the system only).
* * * * * VOLUME
– to increase or decrease the volume.
Easy Set
EASY SET allows you to store all available
radio stations automatically.
• Press and hold STANDBY ON (on the
system only) for 5 seconds when the
system is in standby or demonstration
mode.
™ "EASY SET" will be displayed, and
followed by "TUNER" and then
"AUTO".
™ EASY SET will start searching for all
radio on FM band and then followed
by radio stations on MW band.
™ All available radio stations with
sufficient signal strength will be
stored. Up to 40 presets may be
stored.
Notes:
– EASY SET will start with the FM band, if
there are still presets available, the
system will continue to store the MW
band.
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will appear
on the display when EASY SET is
completed.
CONTROLS
( ( ( ( ( INCREDIBLE SURROUND
– to switch on or off the surround sound
effect.
) ) ) ) )
– to connect headphones.
¡ ¡ ¡ ¡ ¡ CLOCK•TIMER
– to view the clock, set the clock or set
the timer.
™ ™ ™ ™ ™ DIM
– to select different brightness for the
display screen : DIM 1, DIM 2, DIM 3
or DIM OFF.
£ £ £ £ £ AUTO REPLAY
– to select playback mode either in
continuous AUTO REPLAY or ONCE
only.
≤ ≤ ≤ ≤ ≤ DUBBING
– to dub a tape in normal speed.
∞ ∞ ∞ ∞ ∞ TAPE DECK 2
§ § § § § TAPE DECK 1
≥ ≥ ≥ ≥ ≥ REPEAT
– to repeat a CD track, a disc, or all
available discs.
• • • • • SHUFFLE
– to play all the available discs and their
tracks in random order.
ª ª ª ª ª SLEEP
– to switch the system to standby mode
at a selected time.
º º º º º
– to switch the system to standby mode.
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY ON or on the
remote control.
™ The system will switch to standby
mode.
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX
IN terminals.
PCS 103 522
9