Motoalliance Denali Series Assembly

Denali 66'' & 72'' Plow
Blade & Pushtube Assembly
Thank you for purchasing the MotoAlliance's Denali Series 66'' & 72'' Snow Plow System by MotoAlliance! Fully
engineered in the USA, we've paid attention to all the fine details from added horizontal supports and a 65° attack angle,
to a kick pedal locking mechanism and weld nuts under the pushtube for easy install. We believe you now have a plow
that will last for years to come. Please feel free to contact us with any questions.
Warning And User Caution
-
Never allow passengers to ride on the blade while plowing
-
Stay clear of bystanders while plowing
-
Do not exceed 10 MPH with blade installed
-
Always wear safety gear (helmet, glasses, etc) when plowing
-
Always put your vehicle in Park before changing the angle of
the plow blade
-
Use extreme caution when plowing and riding on sloped
surfaces
-
Avoid all fixed objects and always wear a seatbelt
-
Be cautious of the blade when lowering it from an upright
position
-
Always store your blade resting on the ground
Plow Blade Assembly Instructions
Upon opening your Denali Plow Blade box, verify that all the components shown in (Figure 1) are included in your
package.
866.527.7637 (toll free)
www.motoalliance.com
1
23001 Industrial Blvd Rogers, MN 55374
Motoinfo@motoalliance.com