Magnum DeltaForce Updates And Modifications

Export Frequency Modification Instructions:
1. Power up the radio for a minimum of 10 seconds.
2. Turn off and remove power and antenna.
3. Remove covers.
4. Add a 47K resistor to R509 pads. (NOTE: Not necessary on newer units)
5. Remove frequency control knob on the front panel.
6. Remove diode D555 located directly above frequency control switch.
7. Reset the CPU by shorting the two pads as shown.
8. Assemble the radio.
9. Use the (CALL) button to select bands.
To switch between channel and frequency display, press (FUNC)
and press (CALL).
Magnum DeltaForce Updates and Modifications
Copyright (C) 2000 - http://www.cbtricks.com
(25.165 - 29.000 Mhz)
Note: Not necessary on newer units
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5 6 7