3. Overview
3.1 Screen
Solis AC-Coupled inverter adopts LCD screen, it displays the status, operating information and
settings of the inverter.
3.2 Keypad
There are four keys on the front panel of the inverter ( from left to right):
ESC, UP, DOWN and ENTER keys. The keypad is used for:
Scrolling through the displayed options (the UP and DOWN keys);
Access and modify the settings (the ESC and ENTER keys).
Figure 3.1 Keypad
3.3 Terminal Connection
Solis AC-Coupled inverter is different from normal on-grid inverter, please refer to the instructions
below before start connection.
Dry Contact Port
Battery (+)
BAT+
BAT-
Battery (-)
CAN
Figure 3.2 Front panel display
WARNING:
Please refer to the specification of the battery before configuration.
.6.
CT/Meter WIFI
AC backup port(L/N/PE)
AC-BACK
DO
CT/Meter
WIFI
L N PE
L
N
PE
CAN
DRM
COM
AC-GRID
AC grid port(L/N/PE)
DRM
COM
4.1 Select a Location for the Inverter
To select a location for the inverter, the following criteria should be considered:
Exposure to direct sunlight may cause output power derating. It is recommended to avoid
installing the inverter in direct sunlight.
It is recommended that the inverter is installed in a cooler ambient which doesn't
exceed 104℉/40℃.
Figure 4.1 Recommended installation locations
4. Installation
.7.