Rainier ORTHO D9865 Setting Up
  1. Manuals
  2. Brands
  3. Rainier Manuals
  4. Receiver
  5. ORTHO D9865
  6. Setting up

Rainier ORTHO D9865 Setting Up

Hide thumbs
1
2

Advertisement

Table of Contents

SETTING UP LNB'S FOR ORTHO FEED & CONFIGURING D9865.

Pre-setup Procedure

1) Hookup receiver with RG6u jumper cable to receiver, and coax lines from Horizontal and
Vertical LNB's at feedhorn following the diagram below.
2) Put batteries in the remote control.
3) Power on the unit with the toggle switch on the back and bottom right of the unit.
4) Power on your television set and move on to setup procedure.

Receiver Setup Procedure

1. Administration Procedure

1. Press "Menu" Button on remote.
2. Go to "Setup Menu", and press "ok" on remote.
3. Go to "Advanced Setup", press "ok".
4. Go to "Administration", press "ok".
5. Go to "POV Mode", press "ok", and set to "Open" with arrow keys on the left and right of
"ok", and press "ok".
6. Go to "Date Format", press "ok", set to "DD/MM/YYYY", and press "ok".
7. Go to "Time Format", press "ok", set to "12 Hr", and press "ok".
8. Go to "Time Offset"; press "ok"; set to "-5:00" for Eastern, "-6:00" for Central, "-7:00" for
Mountain, "-8:00" for Pacific, "-9:00" for Alaska, or "-10:00 for Hawaii; and press "ok".
9. Press "Exit" button on remote.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ORTHO D9865 and is the answer not in the manual?

Questions and answers

Related Manuals for Rainier ORTHO D9865

Summary of Contents for Rainier ORTHO D9865

  • Page 1 SETTING UP LNB’S FOR ORTHO FEED & CONFIGURING D9865. Pre-setup Procedure 1) Hookup receiver with RG6u jumper cable to receiver, and coax lines from Horizontal and Vertical LNB’s at feedhorn following the diagram below. 2) Put batteries in the remote control. 3) Power on the unit with the toggle switch on the back and bottom right of the unit.
  • Page 2 13. Press “Exit” button. 3. When Saving A Preset When saving a new preset (Channel Group) assign proper LNB polarity profile A or B to corresponding mux’s polarity, Horizontal or Vertical when saving. Document © Rainier Satellite LLC, 2013- 2017. All Rights Reserved.

Table of Contents